To solve problems caused by: The self-sizing corner protection PROPAFIX is a definitely innovative corner protection, patented by Propagroup, to fix and protect goods during transport and storage. The big advantage of PROPAFIX compared to the traditional corner protections, is its great adaptability to all packing sizes. PROPAFIX could be actually defined as a “selfsizing” corner protection. Thanks to its easy-to-cut profiled flaps, the user can choose the best length for protecting the container to be handled, according to the needs. PROPAFIX is rigid and resistant but, thanks to its flexibility, it can also be used to protect irregular shapes such as polygons, triangles, parallelepipeds and even rounded shapes. It is also suitable for protecting three-dimensionally: after cutting a flap you just have to cut the opposite one to obtain a perpendicular fold to the axis of protection of the previous one. PROPAFIX is made with completely recyclable materials, thus solving waste disposal problems both for the user and the end recipient. Anchor damages In order to size-cut PROPAFIX, you just need a pair of scissors in you pocket. With PROPAFIX there will no longer be any need of corner protections of different dimensions on stock because all the required sizes can be obtained from a single piece: this is truly a big advantage in terms of reducing stock and saving storage space

PROPAFIX is available with symmetric flaps measuring 45x45 mm, 50x50 mm, 60x60 mm and 100x100 mm or with asymmetric flaps measuring respectively 60 mm and 100 mm, thus allowing you to choose the positioning according to your current needs. In the sheet steel sector, for example, you will often find packs of different sizes, with pallet heights often below 100 mm. With PROPAFIX you can cut and fold according to the shape of the pack of sheets to be protected. The wider flap is meant to protect the pack vertically, allowing to cover and protect the entire content of the pallet, from the top sheet...