Specifications:
The Lift&Drive 90PRX has a net weight of 39 kg and can handle a maximum load of 90 kg at 400 mm from the column. It features a maximum lifting speed of 83 mm/s when empty and a weight load ratio of 0.43. The device offers a stainless steel option and has a minimum turning radius of 1046 mm. It is CE safety approved.

Battery and Charger:
The lift supports LiFePO4 or VRLA AGM battery types with a nominal voltage of 24 VDC. Battery capacities include 10 Ah for LiFePO4 and 7.2 or 12 Ah for AGM. Charger options are available at 1.5 A or 4 A, with a maximum charge voltage of 29 VDC and a nominal input voltage of 100-240 VAC. Available plug types include Type A (North America), Type C (Europe), Type G (UK), and Type I (AU/NZ). Safety standards for chargers include CE, cCSAus, IEC EN 60601-1, and IEC EN 60601-1-2 for the 1.5A charger, and CE, UL, CSA for the 4A charger.

Tools and Accessories:
Available tools include platforms (with or without side rolls), roll-on platforms, forks, prongs, and various turning and squeezing tools. Bespoke tools are also an option. Accessories include a holder for the battery charger and a V-block.

Dimensions:
The standard model dimensions are provided in millimeters, with specific measurements for the base model and low castors version. The table includes theoretical measurements for various parts of the lift.

Load Capacity Graph:
A graph illustrates the load capacity in relation to the distance in front of the column, showing variations for center and off-center positions.

Disclaimer:
The document includes a disclaimer noting that changes may occur and that illustrations, drawings, and data may not always reflect the latest version or standard model in production.