In-die solutions TK TAPPING UNIT A taiLor-made Tapping soLution for one or severaL taps TK (Turn Key) tapping units with removable single or multitap head and built-in mobility functions. These tapping units are designed with a removable head and may be used for single or multi-tap applications. The tapping head is driven either by mechanical or by servo-driven motorization. The two-part design simplifies operations and enables quick tap change. These units have been studied to integrate the commonly installed functions in the die directly and compactly in the tapping head. According to the proposed version, the «TK» solution integrates the following functions: • Strip guiding, • Vertical strip follow (strip lift), • Quick approach of the tapping head and strip piloting. This made-to-measure turnkey solution is adapted to your • Simple to use: no specific tooling with the head and motor die environment: positions guaranteed by indexing marks and lightened head to ease its handling. • The kinematics are totally controlled: full guarantee of operation and optimized tapping speed. • The tapping station design is simplified and quick to implement.

TKN TKS TKD Basic Essential Full featured Serie Option — Not available *Mechanical "Electromechanical Lightweight tapping headv Secure Cartridge Motorization Lubricated by oil bath, fixed mounted on the Lower shoe Strip guiding function integrated in the tapping head Maxi press stroke2 (mechanical, motorization) Width of the tapping device 170 mm 1 - BSP, TR, G, multi start threads...are also possible.2 - For longer Tap travel, please contact us, we will use special lead screw Rapid approach of the tapping head» function actuated either by pneumatic cylinders, by puLL-rods or by a cam Adjustable...