Tap breakage sensor DETEC V2
2Pages

Tap Sensor DETEC* v2 Improve PPM level with the ultimate Tap Detection System DETEC v2 is the most affordable “on the shelve” tap detection system ; making tap detection easy for both designers and final users. DETEC completes PRONIC tapping solution by ensuring a total control of the tapping process during your production. Simplifying your die design, this highly reliable device can easily be integrated in your future dies and/or your existing ones. What’s new with DETEC v2 ? Since 1st introduced in 2004, PRONIC has sold hundreds of DETEC. It has proved to be a great feature that takes In-Die tapping quality to the next level. DETEC monitors closely the accuracy of your tapping operation, eliminating the need to sort your parts out because of broken taps, a pre-hole too small, or a miss feed. Principle Though completely mechanical, DETEC includes a mechanical sensor that amplifies the motion of the tap to detect even the smallest movement. Top Dead Center OK STOP PRESS Bottom Dead Center Then, the signal is transmitted through a flexible hose to a mechanical receptor installed outside of the die. Easily mounted, the sensor and the “proxy switch/detector” are connected to your press control panel to stop the press if a problem occurs. However, with existing users input, DETEC v2 gets even better: - New stronger axis for heavy loads - New design for simplified mounting - Adjustable cable length for more flexibility to better fit your die design - Easy access for servicing - New compact proxy sensor with LED to visualize tap detection - Simplified set-up - Improved dust protection. Easy mounting Adjustable Cable length (2,36” - 29,53”) Detects tap breakage, missfeed, wrong tap set-up and short tap travel Visual light (LED) when activated by the tap. Accessible set-up Carbide reinforced probe.

Carbide probe - 0,22" travel capacity New heavy duty seal Adjustable cable length 2.36" - 29,53" Compact housing Set-up nuts LED Mounting screw Locating pin Compact proxy sensor included 24Vcc PNP (NPN option: on demand) 3 mounting configurations Distance device /extrusion On the lower shoe (recommended mounting) On the lower shoe (lateral fixation) PRONIC INC. 2152 Washtenaw Avenue YPSILANTI, MI 48197 - USA Tél. : (734)480-9200 Fax : (734)480-9300 pronicinc@pronic.com www.pronic.com Pictures and texts are not contractuals