Pronic - ST Range - In-die Tapping Unit
2Pages

Strip Following system (pressure pad) Drive Screw STS unit with mechanical motorization The most efficient single tap solution Stroke counter (option) The most efficient solution for your application with 1 tapped Standard rollforming tap (quick release system). hole and material lift. • The integration of the tapping unit in the die is really simplified. Lubrication tube for the drive screw Torque Limiter (option) Option: Torque limiter • The kinematic is totally controlled and guarantees the best optimized target speed: The tapping operation starts at the end of feeding, before the stripper contact. STS unit with electromechanical motorization A torque limiter, adjustable from 18 to 33 Nm [13.28 to 24.33 ft-lb] can be installed onto the motorization. • This modular series offer several possible configurations, with universal motorizations that can be use with multiple dies. • The transmissions are universal and simplified To avoid any risk of breakage, this sensor will send a signal to stop the press if an overload occurs and exceed the The tapping head can be driven by a mechanical or servo-driven motorization, which are fully interchangeable. The two pieces design makes the handling of the unit much easier and reduces the downtime for tap change. • User-friendly: No special tools are required to service the unit and the reduced weight tapping head facilitate the handling. The correct location of the tapping head and motorization is ensured by push lock locating pins. Self-powered total counter – IP65 with 8 digits LCD screen. What's included: -Tapping unit configured for your project -Hardware to install the unit in your die -Tap wrench -Technical handbook, application sheet and user manual -BOM and drawings STn unit with tapping from bottom to top Ultra-light tapping head for fast and easy tap change. Integrated strip follower function that dramatically simplify the die. These tapping units are designed with a detachable tapping head to be used for single tap applications. • The function of strip follower is integrated in within the tapping unit. Option: Stroke counter Allows to manage, preventive maintenance, production runs and tap changes, easily. The only single tap tapping unit on the market with a detachable tapping head, integrated strip following feature, and optional Interchangeability of the motorization (mechanical or servo-driven) to help reduce your investment Oil bath lubrication system to get the optimum performance and life out of our product. Optional torque limiter to protect your production Optional cycle counter to maintenance

solution for transfert press Flexibility: • Tap change takes less than 1 min. • Compact design • User-Friendly • Accept all tap standards: DIN, ANSI, JIS Safeties: • Protection against miss-alignment issue and no hole situation • Re-enforced waterproofing and seal to protect from the die environment Service: • Technical support and assistance during the tapping station design • On demand, integration of the tapping unit into your die design • On demand, design and manufacturing of the complete tapping station Tapping head Tapping head Tapping head Tapping direction Tapping direction...