Pronic - In-die Insertion Range
2Pages

Some examples of current application: INSERTION RANGE In-die bushing insertion: In-die insertion trolley and head insertion machine that fits - Insertion of bushing - Insertion from bottom to top - Insertion Head are solid mounted on the lower shoe your needs and even more • Safe operation: Multiple sensors are monitoring the insertion process in the Head and the trolley. • Quick Installation kit: Fast and easy to install, without need for specific tool • Industrial quick coupling on every connexions : Air, Motion control, Pipe • Reduce of investments: Same insertion head could be shared between several tools - Insertion of pins - Insertion from top to bottom - Insertion Head are installed on a pressure pad Pictures and text are not contractuals • Secured process: detection of the presence of component and quality of insertion with dedicated DETEC system - Insertion of tapped rivet - Insertion from bottom to top - Insertion Head are installed on a pressure pad In-die rivets insertion: The insertion heads are mainly solid mounted on the lower shoe, therefore no continuous movement is applied on the different parts involved. Being independent from the kinematics of the die, each inserting head can be shared from die to die. Advantages: In-die pins insertion: Based on its experience of in-die solutions, PRONIC has developed a complete system for in-die components insertion. The installation is done in a few minutes with the quick installation kit and the quick connections for both power (electrical, pneumatic and component). A trolley connected with the press is feeding the insertion head through vibrating bowls and blowpipe. Several references and dimensions of components can be inserted simultaneously with a speed up to 40 parts per minute per head. PRONIC guarantees 100% well inserted components with its dedicated sensor system. As for in-die tapping, you get the full service: Choosing an in-die insertion system from PRONIC means that you have choosen the highest possible performance during each step of your project: • Assistance to define the most appropriate solution • Assistance during die design • Assistance in order to optimize the concept • Assistance in starting-up your die • After-sales service

Insertion Head features: Feeding Trolley features: MAIN FEATURES: • Head shared from one die to another. • Any bushing from Ø8 to Ø20 mm. Components are blown through flexible pipe Quick connections for flexible blowpipe • Many other components can be in-die inserted. Contact us for quotation Keying of components into vibrating bowl with protected access to loading • Up to 40 parts inserted per minute per head. Safe operation: Detection of components before blowing • Solid mounted (on the lower shoe) for insertion from bottom to top, therefore highly reliable. • Insertion also available...