Micro-lubrication unit V2
2Pages

ln-die solutions Reduce your oil consumption while improving your tap life Because added tap life is directly dependent upon the supply of the lubrication, PRONIC has developed a complete system to handle the Equipped with quick fitting connections, this system is very compact, accurate and environmental-friendly, while preventing wasted oil by ensuring that a very low level of oil is being disbursed onto the taps. Ongoing air power with solenoid operated valve Solenoid operated valve knob Micro-pumps regulator Flexible coaxial tubing The micro-pumps push the oil into the micro-lubrication nozzles then an air flux sprays micro-droplet directly on the working zone of the tap. Depending on the hardness of the material to be tapped, the oil volume and number of pulses per cycle can be adjusted. The oil consumption is so low that it is not necessary to plan PRONIC lubrication system is flexible. You can create your own configuration, choose the number of pumps and the oil reservoir capacity (3.7L or 6L). The system is available in 8 standard configurations, from 1 to 3 pumps with a 3.7L reservoir or 4 to 8 pumps with a 6L reservoir, and 2 lengths of coaxial armored tubing are available, 3 or 5 meters. What's new with the micro- The new lubrication system has been developped upon our customer's •The lubrication system is flexible. You can create your own configu- ration by ordering pump sets. • Up to 8 pumps available instead of 6. • Reliable by thicker internal tubes. generator (avoiding oil pollution). •Each pump is equipped with a monitored manometer for air control. • Easy set-up. •Tapping performances increased (higher •Saveon lubricant. •Parts almost clean when stamped. • Quick return on invest- •Flexible System. • Convenient quich-

Dimensions 1 to 3 pumps – 3.7 L oil reservoir Features General • Individual adjustments for the micro pumps (lubricant and air) • Min. air inlet: 800 NI/min . dry and filtered air (5µm) . Air inlet pressure: 5 to 8 bars • 2 oil reservoirs available: 3,7 L or 6 L • Flexible coaxial tubing • Micropump delivery rate . Setting with thumb wheel (small): 7 to 30 mm3 / stroke • Quick fitting connectors for the PRONIC Tapping Units • Max. pump working frequency: 3 strokes / s • Synchronized with the press motion (solenoid operated-valve) • Empty reservoir sensor • Output up to 180 ppm (pulses per...