Progressive dock leveller PP Product Sheet Technical modifications reserved.

Technical modifications reserved.

Progressive dock leveller PP 1 General Information Stationary dock leveller PP is a new element of development of the PROM line of products. It is intended for external and internal ramps and used when small and medium differences in height of the ramp edge and loading deck of a vehicle are to be levelled. The dock leveller is mounted to the ramp face with a steel hinge and lowered onto the loading surface by means of an operating lever in the course of the loading process. Compression springs compensate the leveller weight so that the PP can be effortlessly operated by one person only. If the...

Progressive dock leveller PP 1.2 PPFA – stationary dock leveller with an aluminium lip. The PPFA model is equipped with a segmented aluminium lip adjusting to widths of loading decks and to differences in height between the top edge of the ramp and the bottom edge of the vehicle loading deck. Technical modifications reserved. Platform Aluminium lip Spring unit Operating lever Fall protection mechanism Ramp fixture

Progressive dock leveller PP 1.3 PPV – manoeuvrable dock leveller. The leveller is fixed in a guide profile mounted to the ramp face and can move sideways. The supplied PPV levellers are compatible with commonly used profiles of other brands, which means that there is no need to replace an existing guide profile, as this might require a lot of effort. Technical modifications reserved. Platform Steel lip Spring unit Operating lever Fall protection mechanism Ramp fixture Guide profile

Progressive dock leveller PP 1.4 PPVA - manoeuvrable dock leveller with an aluminium lip. A leveller that combines the strengths of both manoeuvrable dock levellers and levellers with an aluminium lip. 5. Fall protection mechanism Each steel part of the manoeuvrable dock leveller is hot dip galvanised. Pursuant to EN 1398, it is prohibited to use levellers when the acceptable inclination angle of ± 12.5% (ca. ± 7°) has been exceeded. This value may be exceeded only when the user has excluded every possibility of slipping (e.g. by keeping surfaces dry and clean). Technical modifications reserved....

Progressive dock leveller PP3 Onsite setup F Transverse force 84 kN M Maximum bending moment (kNm) Each dimension is given in mm. Technical modifications reserved.

Progressive dock leveller PP 4 .Installing PP levellers on ramps 4.1 Model PPF and PPFA 1 – Hinge plate 2 – Steel mount 1 – Guide profile 2 – Steel mount 3 – End stop Technical modifications reserved.