Mechanical leveler PECO - Operating and maintenance manual
13Pages

PROMsIahI Doc. No. PECO The operating and maintenance manual Revision: 1.0.0 Date: 2012-03-13 Operating Manual PECO dock leveller The operating and maintenance manual Technical modifications reserved

Doc. No. PECO The operating and maintenance manual Revision: 1.0.0 Date: 2012-03-13 Operating Manual PECO dock leveller 1.0 General remarks on safety 1.1 Explanatory notes for drawings The drawings included in this manual should be treated as sample illustrations only. General notes 1.2.1 Is it a proper operating manual? Before you continue to read the manual, please check the identification number of your dock leveller with the identification number on the title page of this manual. This manual applies to the dock leveller of PECO 60kN type only. Technical modifications reserved

Doc. No. PECO The operating and maintenance manual Revision: 1.0.0 Date: 2012-03-13 Operating Manual PECO dock leveller 1.2.2 Who is this manual intended for?   This manual contains manufacturer guidelines concerning procedures to be followed by by the user of the dock leveller and all persons involved in the installation, operation, maintenance and repair the leveller. Persons who are authorized to operate the dock leveller must be instructed by the user and clearly informed about potential risks. 1.2.3 Purpose of this manual   This manual is intended to provide qualified staff with...

Doc. No. PECO The operating and maintenance manual Revision: 1.0.0 Date: 2012-03-13 Operating Manual PECO dock leveller All the regulations relating to dock levellers, even those not specially mentioned in this manual, should be adhered to. Always observe the accident prevention regulations binding in the company. The operator must alway operate the dock leveller from a safe place. Approach, passage and any other traffic on the leveller must be rectilinear and perpendicular to the geometric centerline of the dock leveller. No fork lift truck maneuvering is permitted on the dock leveller....

Doc. No. PECO The operating and maintenance manual Revision: 1.0.0 Date: 2012-03-13 Operating Manual PECO dock leveller Platform of the dock leveller Lip of the dock leveller Steel bumper (applies to R frame only) Rear beam Rubber buffer Operating lever Working opening in the platform for the lever The socket of the lever - in the rest position Use of the equipment according to the intended purpose The dock leveller is to be used only to provide transport route (i.e. to compensate the differences in height) between the warehouse floor and the vehicle bed. Horizontal transport vehicles are...

Operating Manual PECO dock leveller Doc. No. PECO The operating and maintenance manual Revision: 1.0.0 Date: 2012-03-13 • Entering the leveller with vehicles the width of which exceeds the nominal width of the dock leveller minus 700 mm. • Any lifting or lowering of loads/goods using the dock leveller. • Maneuvering the transportation means on the dock leveller.. 2.4 Prohibited operating conditions No operation of the dock leveller is not allowed, if: • maintenance interval has expired. • it was found that the leveller does not work properly or is damaged. • the lip of the dock leveller...

Doc. No. PECO The operating and maintenance manual Revision: 1.0.0 Date: 2012-03-13 Operating Manual PECO dock leveller The dock leveller can be moved from its rest position only by tilting the platform towards the warehouse floor The dock leveller is brought into rotating movement using the lever. The operating lever should be put into special socket in the upper left corner of the leveller. The lever is placed in the lateral part of the dock leveller. Note! Independent operation of the leveller can be carried out only by trained persons who are at least 18 years old. Note! All persons...

Doc. No. PECO The operating and maintenance manual Revision: 1.0.0 Date: 2012-03-13 Operating Manual PECO dock leveller When lifting the dock leveller, pull the level vigorously to automatically open the lip. If the vehicle is already within the distance enabling safe loading/unloading (lip can be supported on vehicle bed with the overlap of ≥ 100 mm), one can lower the leveller onto the vehicle bed). Note! When lifting and lowering the leveller, nobody is allowed to stay within the leveller operating range! Technical modifications reserved

Operating Manual PECO dock leveller Doc. No. PECO The operating and maintenance manual Revision: 1.0.0 Date: 2012-03-13 Once the lip rests on the vehicle bed, pull out the lever from the socket in the dock leveller During loading/unloading, the lever should be put into the socket on the left side of the dock leveller or on a special bracket, if no steel panels are provided. Prior to loading/unloading, the operator must ensure that the lip of the dock leveller rests safely over its entire width on the vehicle bed and that the overlap distance between the lip edge and the edge of the vehicle...

Doc. No. PECO The operating and maintenance manual Revision: 1.0.0 Date: 2012-03-13 Operating Manual PECO dock leveller Once the loading/unloading is finished, the operating lever must be taken out of the socket in the lateral part of the leveller and put in the platform holes. Lift the platform of the dock leveller to the vertical position and fold the leveller by vigorous movement. Technical modifications reserved

Doc. No. PECO The operating and maintenance manual Revision: 1.0.0 Date: 2012-03-13 Operating Manual PECO dock leveller Note! When lifting and lowering the leveller, nobody is allowed to stay within the leveller operating range! Note! The truck can drive away from the dock leveller only after the leveller is put to its rest position. If the lip is folded to its rest position, the dock leveller lowering can be started. The dock leveller is in its rest position if the lip rests on the dedicated supports located in the lower part of the leveller. Pull out the operating level from the hole in...

Doc. No. PECO The operating and maintenance manual Revision: 1.0.0 Date: 2012-03-13 Operating Manual PECO dock leveller platform, the same as when lifting the dock leveller Then put the lever into the socket on the left side of the dock leveller or on a special bracket, if no steel panels are provided. First start-up In order to ensure safe operation of the dock leveller, the first start-up procedure has to be carried out by appropriately trained installation-and-service personnel. If the test run is successful and all operational functions can be performed without any problems, the dock...