- Catalogs
- Promstahl WorldWide
- Mechanical leveler PECO - Installation instructions
- Company
- Products
- Catalogs
- News & Trends
- Exhibitions
Mechanical leveler PECO - Installation instructions
Mechanical leveler PECO - Installation instructions
The installation of the Mechanical Eco Leveller (PECO) requires specific tools and equipment. Essential tools include welding equipment like the ESAB caddy 200 and welding rods such as the ESAB OK 48.00. Lifting equipment must have a minimum load capacity of 10 kN, with options including a forklift truck or crane. Surfaces needing repainting should be clean and dry, followed by cold galvanizing and primer application.
Installation Material
Different materials are required for the installation of PECO types R and P. Type R requires specific bolts and components, while type P has additional optional components marked with an asterisk.
Transport
The mechanical eco leveller can be transported using either a forklift or a crane, ensuring the equipment is secured at designated points.
Installation Procedures
Separate procedures are outlined for installing the mechanical eco leveller types R and P. Each type has specific steps and requirements to ensure proper installation.
Option Rubber Puffer
An optional rubber puffer can be included in the installation, providing additional functionality or protection.
Catalog excerpts
Ronnenberger strafe 20 Mechanical eco leveller (PECO) Version: Date: Page: Installation instructions Mechanical eco leveller Type: PECO Load capacity: 40 kN/60 kN ^ PROM SlAHl GmbH Ronnenberger StraBe 20 D-30989 Gehrden phone +49 (0) 5108 879 270 fax +49(0)5108 879 2710 [email protected] www.promstahl.de We reserve the right to alter technical modifications.
Open the catalog to page 1
Ronnenberger strafe 20 Mechanical eco leveller (PECO) We reserve the right to alter technical modifications.
Open the catalog to page 2
Installation tools The following tools are needed for the installation: • Welding equipment: ESAB caddy 200 (5-200A) or similar equipment • Welding rod: ESAB OK 48.00 3,25 or similar equipment Lifting equipment • Forklift truck: load capacity of 10 kN, fork length: 800 mm, or • Crane: load capacity of 10 kN min. in the required range of operation. Note! Secure the lifting equipment only at the points marked with this symbol! Repainting of welded and damaged surfaces: Surfaces which have to be repainted must be dry and free of dirt, grease, rust, etc. Use wire brush and thinner. • Spray cold galvanising...
Open the catalog to page 3
Ronnenberger strafe 20 Mechanical eco leveller (PECO) Mechanical eco leveller type P We reserve the right to alter technical modifications.
Open the catalog to page 4
Ronnenberger strafe 20 Mechanical eco leveller (PECO) • Transport using a crane We reserve the right to alter technical modifications.
Open the catalog to page 5
Ronnenberger strafe 20 Mechanical eco leveller (PECO) We reserve the right to alter technical modifications.
Open the catalog to page 6
We reserve the right to alter technical modifications.
Open the catalog to page 7
Ronnenberger strafe 20 Mechanical eco leveller (PECO) We reserve the right to alter technical modifications.
Open the catalog to page 8
Ronnenberger strafe 20 Mechanical eco leveller (PECO) We reserve the right to alter technical modifications.
Open the catalog to page 9
Ronnenberger strafe 20 Mechanical eco leveller (PECO) We reserve the right to alter technical modifications.
Open the catalog to page 10All Promstahl WorldWide catalogs and technical brochures
Imagefolder8 Pages
LED Dock Lights1 Page
Distribution Book of PromSTAHL852 Pages
Sectional overhead doors56 Pages
CATALOG36 Pages
