Mechanical Dock Shelter PMV - Data sheet
16Pages

Mechanical dock shelter PMV Data sheet Technical modifications reserved

Mechanical dock shelter PMV Technical modifications reserved v: 2.0.0

Mechanical dock shelter PMV 1. General information The PMV-type mechanical dock shelter is a new design in the wide range of PROMStahl products. It is designed for customers who attach a great importance to power saving and intending to protect their goods against atmospheric conditions. Differences between the dimensions of the warehouse door opening and the docked truck create empty spaces which must be sealed in the best possible way. The front and rear frame of the PMV shelter is made of durable extruded aluminium profiles resistant to tough operating conditions, connected to each other...

Mechanical dock shelter PMV 1.1 Design features Nominal widths (NW): 3250, 3300, 3400, 3450 mm (optionally to 3600 mm) Nominal heights (NH): 3200, 3400, 3500, 3600 mm (optionally to 4500 mm) Nominal depth (ND): 600, 900 mm Top cushion nominal height (A): 1000, 1200, 1500 mm Side cushion nominal height (B): 600 mm (to NW 3400) , 700 mm (from NW 3450) Mounting height (MH): 4500 mm (recommended) Material of main cushions: black PVC, 3 mm, double textile interweaving, approx. 3400g/m2 Material of wall and roof cushions: black PVC, 0.5 mm, textile reinforcement, approx. 680 g/m2 Approach lines:...

Mechanical dock shelter PMV 1.2 Table of dimensions Nominal widths Nominal heights Nominal depth Top cushion nominal nominal height Side cushion nominal width Mounting height Technical modifications reserved

Mechanical dock shelter PMV 2. Top cushion 2.1 Standard A standard solution with side cuts. Suitable for most loading operations of typical size vehicles. 2.2 Cushion with additional side cuts (T-type) A cushion supplied with additional cuts forming six flaps, three on the right and three on the left side. Technical modifications reserved

Mechanical dock shelter PMV A cushion supplied with additional cuts along its entire length. It ensures optimal sealing of vehicle corners, in particular at a large variability of docked vehicle width. 2.4 Cushion with a number Optional marking, e.g. dock number. Technical modifications reserved

Mechanical dock shelter PMV 3. Side cushion 3.1 Approach lines Standard white approach lines for easier vehicle docking. 3.2 Stiffening slats Additional optional elements stiffening the side cushion. They ensure greater pressure of the cushion to the vehicle, thus better sealing. Technical modifications reserved

Mechanical dock shelter PMV 3.3 Cuts for buffers Optional cuts in the side cushions to prevent material damage if buffers of large thickness are applied. Technical modifications reserved

Mechanical dock shelter PMV 4. Other auxiliary equipment 4.1 Rainwater gutter A special gutter integrated with the roof of the device for removal of rainwater to the sides. It prevents accumulation of water in the loading zone. Technical modifications reserved

Mechanical dock shelter PMV 4.2 Sealing rolls Optional resilient rolls ensure additional sealing of the bottom PMV shelter corners. Technical modifications reserved

Mechanical dock shelter PMV 4.3 Electric sealing blind An additional electric sealing blind. It is designed to support vehicle if huge height differences. Direct control or integrated with the controller of the PROM dock leveller. Technical modifications reserved

Mechanical dock shelter PMV 5. Fixing to the building Along with the PMV shelter, a range of mounting sets adjusted for an individual building scenario can be supplied. Concrete wall Insulated wall Sandwich plate Cellular concrete Technical modifications reserved

Mechanical dock shelter PMV 6. Assembly drawings NW Nominal width MH Mounting height (recommended = 4500 mm) C Gate height Technical modifications reserved

Mechanical dock shelter PMV 7. Selection of sealing Mounting height To ensure proper sealing and functioning of the PMV dock shelter, the mounting height should be at least 250 mm greater than the maximum height of the docked vehicle (Hmax). Top cushion length A condition of good sealing of a vehicle is a properly selected dimension of the top cushion – A. The length of the lap on the vehicle (difference between the height of the lowest docked vehicle (Hmin) and the height of the bottom edge of the cushion overlapping the vehicle) should be at least 200 mm. Free space above the sealing In...

Mechanical dock shelter PMV Sealing depth The sealing depth must be selected so the side and top cushions are able to cover the vehicle along its entire height, considering the inclination angle of the manoeuvring yard and the vehicle, and buffer thickness. a[%\ -H < ND — Grubosc odboju Technical modifications reserved