Product datasheet Loading ramp with telescopic (PAT) Page: 1 / 8 Doc. No.: Product datasheet PAT Version: 1.1.5 Date: Classification Loading ramp with telescopic lip leveller Typ PAT We reserve the right to alter technical specifications.

Product datasheet Loading ramp with telescopic (PAT) Page: 2 / 8 Doc. No.: Product datasheet PAT Version: 1.1.5 Date: Classification Loading ramp with telescopic lip leveller (PAT) The PAT loading ramp is a new product of PROMStahl’s wide product range. This top-quality product benefits from over 15 years of experience in designing and manufacturing docking systems. This ramp is a complete loading system which is mounted in front of a door opening or a building as a self-supporting unit. It consists of a hydraulic dock leveller with a telescopic lip and lateral treads which are reinforced on...

Doc. No.: Product datasheet PAT Version: 1.1.5 Date: Classification 2012-01-26 level: 1 Loading ramp nominal length (NL + 20) Dock leveller nominal length Dock leveller nominal width Overall length Lip extension Leveller height Dock height Dock width Loading ramp module width Level equalisation above dock Level equalisation below dock Installation angle * Product datasheet Loading ramp with telescopic (PAT) Page: 3 / 8 In accordance with the EN 1398 standard, the leveller must not be used beyond the permissible gradient range of ± 12.5% (around ± 7°). The limits may only be exceeded if the operator...

Doc. No.: Product datasheet PAT Version: 1.1.5 Date: Classification Product datasheet Loading ramp with telescopic (PAT) Page: 4 / 8 We reserve the right to alter technical specifications.

Doc. No.: Product datasheet PAT Version: 1.1.5 Date: Classification 2012-01-26 level: 1 Product datasheet Loading ramp with telescopic (PAT) Page: 5 / 8 Buffers Fixed as well as movable buffers are designed to absorb impact during the docking process protecting both the vehicle and the loading system from damage. All rubber elements of our PROMStahl buffer series are made of high-quality rubber material ensuring a long service life. Rubber elements without plate PBGP The rubber buffers consist of high-quality new rubber material and stand out for their high resistance to wear and tear; they are...

Doc. No.: Product datasheet PAT Version: 1.1.5 Date: Classification 2012-01-26 level: 1 Product datasheet Loading ramp with telescopic (PAT) Page: 6 / 8 Height-adjustable buffers PGV 90 Buffer with vertical guide (rubber element: thickness 90 mm) PGV 140 Buffer with vertical guide (rubber element: thickness 140 mm) These buffers are used for loading and unloading of vehicles whose lorry beds are higher than dock level. Height-adjustable buffers can be lifted by up to 250 mm above dock edge. During loading and unloading the buffer adjusts to the lorry’s vertical movements. It moves up to 50 mm...

Product datasheet Loading ramp with telescopic (PAT) Page: 7 / 8 Doc. No.: Product datasheet PAT Version: 1.1.5 Date: Classification • Buffers with protective housing PGFS 90 Buffer with protective housing (rubber element: thickness 90 mm) PGFS 140 Buffer with protective housing (rubber element: thickness 140 mm) For higher impact loads buffers with protective housing are recommended. The sloped protective plate prevents the buffers from being heavily damaged. Thanks to the lateral flat steel guides the fixing bolts of rubber buffers are optimally protected against shearing. Spring steel buffers...

Doc. No.: Product datasheet PAT Version: 1.1.5 Date: Classification 2012-01-26 level: 1 Product datasheet Loading ramp with telescopic (PAT) Page: 8 / 8 Installation angles Standard 90°, 45°/135°, 60°/120°, 75°/105° (further installation angles on request) We reserve the right to alter technical spec