Inflatable dock shelter PWI - Data sheet
16Pages

Pneumatic dock shelter PWI.02 Data sheet Technical modifications reserved

Technical modifications reserved v: 1.0.0.

Pneumatic dock shelter PWI.02 1. General information The PWI type pneumatic dock shelter is a new design in the wide range of PROMStahl products which combines optimal sealing performance with application versatility. It is intended for customers who pay special attention to power savings and want to protect their goods from the effect of atmospheric conditions. Differences between the dimensions of the warehouse door opening and the docked truck create empty spaces which must be sealed in the best possible way. The inflatable side and top cushions adhere closely to a vehicle forming almost...

Pneumatic dock shelter PWI.02 • Nominal width (NW): 3300; 3500; 3600 mm • Nominal heights (NH): 3600, 4000, 4700 mm • Structure depth (ND): 920 mm • Top cushion nominal height (D): 1350, 1750 mm • Top cushion nominal width: 650 mm • Mounting height (MH): 4700 mm (recommended) • Cushion material: codura, PVC (0.5 mm) with textile interweaving, PVC sheathing (3 mm) • Wall and roof material: 40 mm thick insulated sandwich panel Technical modifications reserved v: 1.0.0.

Pneumatic dock shelter PWI.02  Stripes: white, yellow  Assembly sets: concrete wall, insulated wall, sandwich panel, steel plate  Blower: 230/400V, 50Hz, 0,55kW The cushions in the resting position (not blown) are hidden behind the sealing claddings. This ensures that the truck driver can see the whole ramp when backing up the vehicle. When the vehicle is in the dock, the cushions inflate in 30 seconds providing perfect sealing from top and side of the trailer. Time of return to the initial position is 40 seconds. An unquestionable advantage of this solution is the fact that the cushions...

Pneumatic dock shelter PWI.02 1.2 Table of dimensions NW - nominal width NH - nominal height ND - nominal depth MH - mounting height D - top dock shelter nominal height DW - door width DH - development height Technical modifications reserved

Pneumatic dock shelter PWI.02 2. Options 2.1 Cushions made entirely of PVC The solution increasing the resistance of the device cushions to the effect of atmospheric conditions and reducing the risk of damage by imprecise docking or use of untypical vehicles. The whole cushion is made of 0.5 mm thick PVC with textile interweaving. 2.2 Additional front cover of the cushion Technical modifications reserved

Pneumatic dock shelter PWI.02 A 3 mm thick PVC cover with textile interweaving. It improves the strength of cushions in docks of very high loading intensity. 2.3 Stripes Standard white or optionally yellow stripes for easier docking of vehicles. 2.4 Bottom zone sealing cushion An additional component available for the ramp version. It is located in the bottom part of the side cushion and seals the PWI shelter corner. Technical modifications reserved

Pneumatic dock shelter PWI.02 2.5 Electric sealing blind An additional sealing blind with an electric drive for handling trucks of significant height differences. Directly controlled or integrated with the PROM docking leveller controller. Technical modifications reserved

Pneumatic dock shelter PWI.02 3. Design variants Ramp model Shelters of nominal height of 3600 and 4000 mm. Mounted in loading stations in which the warehouse floor and the truck cargo surface are almost at the same height. Road surface model A shelter with external height of 4700 mm. Used in docks where goods are loaded from the road surface. Technical modifications reserved

Pneumatic dock shelter PWI.02 4. Fasteners to the building Mounting sets adopted to an individual building scenario can be delivered with the PWI shelter. Concrete wall Technical modifications reserved

Pneumatic dock shelter PWI.02 Aerated concrete Metal sheet Technical modifications reserved Anchor M10x120 oc. Threaded bar M8 oc. Spacer Washer D100 oc. Nut M8 oc. Round washer A8.4 oc. Spring washer A8 oc. r Scew M8x45 oc.

Pneumatic dock shelter PWI.025. Assembly drawings Position of mounting openings. Sealing of external dimensions: NH=3600 and NH=4000. Hall floor Technical modifications reserved

Pneumatic dock shelter PWI.02 NW-56 Technical modifications reserved

Pneumatic dock shelter PWI.02 6. Selection of sealing Assembly height To ensure proper sealing and functioning of the PWI dock shelter, the assembly height should be at least 500 mm higher than the maximum height of the docked vehicle. Technical modifications reserved

Pneumatic dock shelter PWI.02 Sealing depth The sealing depth must be selected so the side and top cushions are able to cover the vehicle along its entire height, considering the inclination angle of the manoeuvring yard and the vehicle, and buffer thickness. :; H ■■■■ 5 51 - Buffer thickness Technical modifications reserved