- Catalogs
- Promstahl WorldWide
- Hydraulic Swing Lip Leveler PS - Installation manual
- Company
- Products
- Catalogs
- News & Trends
- Exhibitions
Hydraulic Swing Lip Leveler PS - Installation manual
Hydraulic Swing Lip Leveler PS - Installation manual
The installation of the dock leveller requires specific tools such as an ESAB caddy 200 welder and lifting devices like a forklift truck with a minimum capacity of 35 kN. Safety precautions include using operational lifting devices and staying outside the excavation level to prevent injuries.
Construction Preparation
Power supply requirements include a 3/N/PE AC 50 Hz 400 V connection with a motor power of 0.75 kW. A cable protective pipe with a minimum external diameter of 50 mm is necessary.
Installation Material
The installation set includes the leveller, control system, installation diagram, and operating manual. Some items like the cable holder and cable duct are not included.
Electric Connections
Electric connections require a 3 x 0.75 mm2 cable and a motor cable of 4 x 1.5 mm2. All electrical work must be performed by qualified personnel, and the dock leveller must be disconnected from the power supply before starting.
Installation Manual: T-frame
Details on the installation of the T-frame are provided, with specific instructions on tack welding.
Options and Frames
Various frame options are available, including W-frame, F-frame, O-frame, B-frame, Rama P, and Rama SMD. Each frame has specific installation requirements and components that may not be included in the supply.
Functioning Inspection and Completion
After installation, the dock leveller should be tested in all operating modes. Any malfunctions should be reported to the customer service department. Repair painting of welds and damaged points is necessary, following specific drying times for primer and topcoat paint.
Catalog excerpts
Dock leveller with hinge lip PS Installation manual Technical modifications reserved
Open the catalog to page 1
Dock leveller with hinge lip PS Technical modifications reserved
Open the catalog to page 2
Dock leveller with hinge lip PS General information Installation tools The following tools are necessary for installation works: ESAB caddy 200 (5-200 A) welder or similar device ESAB OK. 48.00 3.25 welding electrodes or similar Lifting devices Forklift truck: capacity min. 35 kN, fork length: 2000 mm Crane: capacity min. 30 kN Hint! Hang only in places marked with this sign. Always use all lugs. Caution! Disconnect the dock leveller from the power supply prior to electric works. Electric works may be carried out by qualified personnel only. Functioning inspection and completion of works...
Open the catalog to page 3
Dock leveller with hinge lip PS Construction preparation Power supply Network protection Motor power Cable protective pipe, external diameter min. 50 mm, bends <45° Door/Leveller locking connector * * Special equipment Technical modifications reserved
Open the catalog to page 4
Dock leveller with hinge lip PSInstallation material 5. Operating manual 6. Cable holder * 7. Cable duct (with fittings) * Technical modifications reserved v: 2.0.0
Open the catalog to page 5
Dock leveller with hinge lip PS Transport Technical modifications reserved
Open the catalog to page 6
Dock leveller with hinge lip PS Installation manual: T-frame Technical modifications reserved
Open the catalog to page 7
Dock leveller with hinge lip PS * tack welding Technical modifications reserved
Open the catalog to page 8
Dock leveller with hinge lip PS Electric connections Technical modifications reserved
Open the catalog to page 9
Dock leveller with hinge lip PS (included in the set) 2. Cable duct (built-in) 3. Locking connector (door/leveller*) 7. Pipe for electric cables. Internal diameter min. / CEE 16A Protection DD 10A Motor power 0.75 kW (standard) Technical modifications reserved
Open the catalog to page 10
Dock leveller with hinge lip PS on special request Technical modifications reserved v: 2.0.0
Open the catalog to page 11
Dock leveller with hinge lip PSOption: bumper Technical modifications reserved v: 2.0.0
Open the catalog to page 12
Dock leveller with hinge lip PS W-frame Technical modifications reserved
Open the catalog to page 13
Dock leveller with hinge lip PS F-frame Washers are not included Technical modifications reserved
Open the catalog to page 14
Dock leveller with hinge lip PS O-frame Technical modifications reserved
Open the catalog to page 15
Dock leveller with hinge lip PS Technical modifications reserved v: 2.0.0
Open the catalog to page 16
Dock leveller with hinge lip PS B-frame Technical modifications reserved
Open the catalog to page 17
Dock leveller with hinge lip PS Rama P Technical modifications reserved
Open the catalog to page 18
Dock leveller with hinge lip PSRama SMD Technical modifications reserved v: 2.0.0
Open the catalog to page 19
Dock leveller with hinge lip PS Technical modifications reserved
Open the catalog to page 20
Dock leveller with hinge lip PS Technical modifications reserved v: 2.0.0
Open the catalog to page 21
Dock leveller with hinge lip PS Technical modifications reserved
Open the catalog to page 22
Dock leveller with hinge lip PS Technical modifications reserved v: 2.0.0
Open the catalog to page 23All Promstahl WorldWide catalogs and technical brochures
Imagefolder8 Pages
LED Dock Lights1 Page
Distribution Book of PromSTAHL852 Pages
Sectional overhead doors56 Pages
CATALOG36 Pages
