Catalogs >
Promotech >
PRO-52T

PRO-52T
4Pages

Catalog excerpts

UNIVERSAL TAPPING AND DRILLING MACHINE The PRO-52T drilling machine is suitable for hole cutting and tapping applications. Powerful 1600 W variable speed motor enables milling capacity up to 50mm (2”) and drilling capacity up to 23 mm (7/8”). Machine’s forward & reverse work modes allow thread cutting up to M20 with Promotech’s new tapping system. Two speed gearbox with continuous speed adjustment allows to set the optimal speed depending on diameter, steel grade or tool quality. Intelligent speed control system maintains constant motor speed regardless of changing loads. Innovative 360-degree LED indicator facilitates proper machine operation and increases work safety. • 1600 W powerful motor with heavy duty 2-speed gearbox • intelligent speed control system maintains stable speed regardless of load changes • tapping of through and blind holes • milling with TCT or HSS cutters or drilling • electronic speed control • electronic clutch • both overload and overheat protection • rigid design extends tool life • tilt sensor stops the motor in cases of machines break away • 360-degree visual monitoring system indicates current condition of the drill and gives safety and diagnostic information e.g. worn brushes • innovative smart magnet with reduced weight • intuitive control panel at top of the drill • large coolant container Worn brushes indicator

Open the catalog to page 1

Counterclockwise (CCW) rotation User-friendly control of tapping tool release Speed knob Milling capacity up to 50 mm (2") • Max depth up to 75 mm (3") Drilling capacity up to 23 mm (7/8") • Max stroke up to 190 mm (7-1/2") _| 360-degree Visual Monitoring System - VMS CONDITION OF THE DRILL _| Promotech introduces quick change tapping system including: • TC - Tapping chucks with securing nut • TA - Tapping Adapters for through holes • TASC - Tapping Adapters Safety Clutch for blind holes • RA - Reduction Adapters Standard tapping configuration Optional tapping configuration

Open the catalog to page 2

Promotech quick change tapping system accessories suitable for PRO-52T drilling machine: TC - Tapping chucks with securing nuts Product Code Product Code

Open the catalog to page 3

Motor Speeds (under load) Motor Power Voltage Magnetic clamping force (surface with the thickness of 25 mm and roughness Ra = 1.25) Magnet Base Dimensions Tool holder * If more than 51 mm (2″), use AMT2-C19/2-3 Arbor (UCW-0220-00-00-00-4). More optional accessories: Arbor AMT2-C19/2-3 for 75 mm (3”) depth cutting product code: UCW-0220-00-00-00-4 Pressure cooling system capacity of 2 liters product code: UKL-0440-16-00-00-0 Vacuum pad product code: PDS-0587-00-00-00-0 Pipe attachment DMP 251 for pipes with diameters of 80–250 mm (3–10”) product code: PDS-0110-03-00-01-0 Compressed air...

Open the catalog to page 4

PRO-52T 4Pages

Catalog excerpts

All Promotech catalogs and technical brochures

PRO-52T
4Pages