smart tools ■ ABM-28 I PORTABLE AUTO FEED MACHINE This latest generation portable beveling machine performs auto feed beveling on steel plates on top, face and bottom edges. Most important features include: • Auto-feed portable beveling. • Continuously adjustable bevel angle between 60 and minus 60 degrees, eliminating the need to turn a plate over • Max. bevel width (depending on the beveled • Variable feed control for work on a variety of steel grades and thicknesses (up to 35 mm as standard • Beveling in both travel directions • Motor overload protection • J groove beveling available as option • Quick setup • Extendable rails The ABM-28 can perform beveling along steel plate's edge in both travel directions eliminating hard physical work of the operator. Required length of the guide track (rail) can be accomplished with additional sections of guide tracks. Plate thickness Bevel width Bevel angle Top beveling Facing off Bottom Clad removal (option) J-groove max 35mm up to 35mm from 60 to beveling depth up to 5 mm (0.2") beveling 36-70mm (option) minus 60" width up to 25 mm (1") (

ABM-28 TECHNICAL SPECIFICATION Voltage Spindle speed (no load) Weight (machine with 1 guide track) Plate thickness Feed speed Maximum bevel width (b) Maximum bevel width depends on the beveled angle Milling heads for beveling (standard) and for J-groove (option) Standard shipping set: 1. Carriage mounted on a guide track 2. Milling unit 3. Milling unit support for beveling at 60° to - 60° 4. Additional guide track section 5. Track clamp for 10-35mm thick plates (3 pcs) 6. Chip container 7. Set of tools 8. Clamp for 10-35mm thick plates (2 pcs) - Wooden box - Operator’s Manual GLW-000013 Milling...