ABM-14 plate and pipe beveler


Catalog excerpts

ABM-14 plate and pipe beveler - 1

PLATE AND PIPE BEVELLER ABM-14 is a beveling machine designed to mill plates and pipes made of carbon steel, alloy steel, stainless steel or aluminum alloys. In just one single run the machine can bevel up to 2.6 m/min. (8.5 ft/min.) to a width of 12 mm (1/2’’) in workpieces with tensile strength of Rm ≤ 392 MPa (57,000 psi). Maximum bevel width is 14 mm (9/16’’). Depending on materials two or more runs are needed. Bevel angles incl. 30° (standard) and with optional angle variation devices also 22.5o, 25o, 35o, 37.5o or 45o. The machine can bevel plates from the top and bottom. In the case of the milling tool getting stuck in the material and beveling cannot be continued the direction of rotation of the tool can be reversed to release the machine from the workpiece. There is no need to wear acoustic protection equipment because the noise produced by the machine does not exceed 70 dB. Features & benefits • fast and efficient • bevels both small and large pieces to cover most of the common applications for its type • auto feed on large plates with optional trolley • beveling of lower edge in inverted position • standard shearing cutter for machining carbon steel • 2 optional shearing cutters dedicated to stainless/alloyed steel and aluminum • reversible spindle against stuck milling tool • versatile and transportable on its own trolley • low noise Min plate thickness 6 mm Max plate thickness 40 mm (1-9/16’’) Bottom beveling

Open the catalog to page 1
ABM-14 plate and pipe beveler - 2

Voltage Power Spindle speed Bevel angle range (B - depending on angle device in use) Bevel width (b) Maximum bevel in one single run Minimum plate thickness Maximum plate thickness Minimum plate width Bevel length per minute Minimum pipe ID Weight Product Code: SINGLE RUN BEVELLING - CARBON STEEL R < 392 MPa 392-490 MPa 490-588 MPa SINGLE RUN BEVELLING - STAINLESS / ALLOY STEEL R < 490 MPa 490-588 MPa 588-686 MPa

Open the catalog to page 2
ABM-14 plate and pipe beveler - 3

_| Standard set includes: • ABM-14 beveller • milling cutter for stainless steel • cutter extraction tool • tube beveling shaft • tube beveling washer • flat wrenches: 12-13 mm, 18-19 mm, 24-26 mm • hex wrenches: 5 mm and 6 mm • operator’s Manual _| Optional and spare accessories: • FRZ-000586 Milling cutter for mild steel • FRZ-000588 Milling cutter for stainless steel • FRZ-000587 Milling cutter for aluminum • SCG-000002 Milling cutter extraction tool Angle Variation Angle Variation Angle Variation Angle Variation Angle Variation Angle Variation • TRZ-000017 Tube beveling shaft •...

Open the catalog to page 3
ABM-14 plate and pipe beveler - 4

Bottom plate beveling Oval workpiece and pipe beveling Maximum bevel width up to 14 mm All information is subject to change without notice. 1705 ABM-14 runs along a plate automatically PROMOTECH Sp. z o.o. ul. Elewatorska 23/1, 15-620 BIAŁYSTOK, POLAND tel. (+48 85) 678 34 05, fax (+48 85) 662 78 77 marketing@promotech.eu www.promotech.eu Your local dealer:

Open the catalog to page 4

All Promotech catalogs and technical brochures

  1. PRO-132T

    6 Pages

  2. PRO-112T

    6 Pages

  3. PRO-52T

    4 Pages