- Catalogs
- ProMik GmbH
- MSP2000NET
- Products
- Catalogs
- News & Trends
- Exhibitions
MSP2000NET
MSP2000NET
The MSP2000NET is a high-performance modular production in-line programming system designed for parallel programming. It is available in various configurations including a 19'' rack version, a 19'' ½ rack version, and a desktop version.
Technical Specifications
- Multi-standard programmer with configurable I/Os supporting multiple interfaces such as BDM, JTAG, SPI, SCI, and I2C.
- Fast Ethernet interface with auto-sensing speed and full/half duplex mode.
- Adjustable I/O voltage from 3.0 to 5.0 V and target voltage from 2.8 to 5.5 V.
- Programming high voltage output up to 12.7 V / 200 mA.
- Supports two simultaneous target connections with dedicated connectors for FlexRay, CAN, and LIN interfaces.
- Power consumption is a maximum of 10 W, typically 5.5 W without target.
- Modular concept allows for various options including high-speed interface and galvanic isolation.
- Operating temperature range is 0 to 60°C.
Desktop Options
- C1: Two target interfaces with analog isolation.
- C2: Two target interfaces with galvanic isolation of programming voltage and configurable I/O signals.
- C3: Two high-speed target interfaces supporting up to 120 MHz clock frequency.
Rack Technical Data
- Accommodates up to 10 MSP2000NET modules in a standard 19” rack or 5 in a 19’’ ½ rack.
- Integrated Ethernet switch and power supply for programmers.
- Rear panel connections include 100-240 VAC and Ethernet RJ45 host interface.
- Standard rack dimensions are 482 x 132 x 348 mm.
Rack Options
- R1: Two target interfaces with analog isolation.
- R2: Two target interfaces with galvanic isolation of programming voltage and configurable I/O signals.
- R3: Two high-speed target interfaces supporting up to 120 MHz clock frequency.
Software Solutions
- WinStarNET for Desktop MSP2000NET.
- Winp_onlineNET.
- FlashTASK.
Note
ProMik GmbH reserves the right to change product specifications without prior notification. This document is for informational purposes only and does not represent a contractual obligation.
Catalog excerpts
MSP2000NET Multi Standard Programmer High Performance Modular Production In-Line Programming System for Parallel Programming
Open the catalog to page 1
• Multi Standard Programmer with configurable I/Os supporting multiple interfaces (BDM, JTAG, SPI, SCI, I2C,…) with individual ground return lines for each signal • Fast Ethernet interface 10/100 M-Bit/s (auto-sensing speed and full/half duplex mode, auto cross-over capability • I/O voltage of interface signals adjustable from 3.0 to 5.0 V • Target voltage (U_Module) adjustable from 2.8 to 5.5 V, max. 500 mA • Programming high voltage output, max. 12.7 V / 200 mA • Analogue input voltage range 0 to 5,5 V • Digital input voltage range 2.8 to 5.5 V • Separation of the I/O signals with CMOS switches...
Open the catalog to page 2All ProMik GmbH catalogs and technical brochures
PSU20002 Pages
ICTP20002 Pages
SAP21002 Pages
SAP20002 Pages
SAP10202 Pages
SAP10102 Pages
MSP2100-Portable2 Pages
MSP2100/2150NET2 Pages
MSP1000NET2 Pages
SAP2100-AUTO2 Pages
PSU20482 Pages
MSP2200/2250NET2 Pages
