A modular, easy to use and cost effective multimode reader for Luminescence, Fluorescence, and Absorbance Life Science applications.

Glomax®-Multi JR Single Tube Multimode Reader Overview The GloMax®-Multi Jr Single Tube Multimode Reader is designed to provide the utmost flexibility. In addition to high performance, the GloMax®-Multi Jr blends user-friendly operation and a small footprint with flexible purchasing options. The result of this design is an instrument with superior performance that is easy to use, affordable, and can be customized to your laboratory’s needs. Performance The GloMax®-Multi Jr combines the superior performance expected from single-mode instruments with the functionality of multiple modes. To achieve...

Instrument features For luminescence measurements, the GloMax®-Multi Jr accepts 1.5-ml microcentrifuge tubes. For fluorescence and absorbance measurements, the GloMax®-Multi Jr accepts standard 10 x 10 mm cuvettes. Adjust settings to start measurement immediately after the lid is closed. Tr o u b l e s h o o t i n g Easy access to HELP with the touch of a button. PCR Tube Adapter An optional PCR Tube Adapter allows measurement of small fluorescence sample volumes (100 µl minimum) in 0.5 mL PCR tubes without sacrificing instrument sensitivity. Minicell adapter For fluorescence measurements of...

multimode performance Luminescence The GloMax®-Multi Jr with a Luminescence Module is designed to deliver performance equivalent to dedicated single-tube luminometers while also offering the flexibility of a multimode reader. To achieve sensitivity on par with that of a dedicated luminometer, the luminescence channel is separated from other measurement technologies and positioned directly below the sample well. These conditions maximize light capture for the best possible sensitivity. In addition, a low-noise photomultiplier tube ensures that collected light is not compromised. The GloMax®-Multi...

INTUITIVE USER INTERFACE Choose from pre-loaded Promega protocols, saved protocols, or create your own custom protocol. Use the Instrument Control screen to edit parameters, then press MEASURE in raw fluorescence mode, or touch calibrate to create a new calibration or run a previously stored calibration. For absorbance measurements, insert a blank control and press BLANK. Based on what you've selected on the touch screen, absorbance data is presented in either percent of transmission or absorbance units. Simple parameter set up allows flexibility without adding Collect data quickly and easily...

Available Detection Modes Luminescence, Fluorescence, Absorbance Light Source Read Type Glow, Kinetic, Repeat Sample Format 10 x 10 mm cuvette, 100 - 200 µl minicell vial (optional), 0.5 mL PCR tube (optional, fluorescence), 1.5 ml microcentrifuge tube (luminescence) Wavelength Selection User Interface Touch screen navigation and operation Data Output Data displayed on screen or connect to PC (not included) via serial cable to download. Optional thermal printer available. Snap-in Fluorescence Modules UV (Ex 365 nm, Em 410 - 450 nm) Blue (Ex 460 nm, Em 515 - 570 nm) Green (Ex 525 nm, Em 580 -...