The Promeco Extruder System® Densfier is an extruder equipped with twin counter-rotating screws able to work continuously as agglomerator for different kinds of plastic, including heavily printed, contaminated and high humidity plastic materials. SYSTEM FLEXIBILITY Waste has different size, water content, density and composition, therefore the PES densifier has been designed to handle this difference automatically in the best way. • Mixing of polymers and other fillers • Degasing of inks and organic compounds • Degasing moisture Lower space required for the equipment Lower power installed and used than traditional systems Simplified maintenance time and costs High productivity and versatility Low management and operation costs _PROMECOINPUT MATERIAL Plasmix, thermoplastic and plastic waste, PE from washing lines, PP, EPS, Tetrapak, LDPE, HDPE, AI+PE, polyolefins including nylon carpet, nylon fishnets (PA6), food packaging, blend of plastic and wood, plastic and rubber, multi-layer plastic, plastic from WEEE. OUTPUT MATERIAL • Fully melted and homogenized plastic • Degased material • Fully mixed CAPACITY The processing capacity depends mainly on the characteristics of the input plastics. The average production is 1500 kg/h with input moisture < 15%. PROMECO S.P.A. WWW.PROMECO.rT MACHINE