- Catalogs
- Promeco S.p.A.
- PRODUCTION OF PELLETS FROM TETRAPAK AND WASTE PULPER
PRODUCTION OF PELLETS FROM TETRAPAK AND WASTE PULPER
1 / 1 PageView full catalog
PRODUCTION OF PELLETS FROM TETRAPAK AND WASTE PULPER
Product catalog summary
Introduction
This document outlines the process for producing pellets from Tetrapak and waste pulper materials. The focus is on converting waste into reusable forms such as RDF pellets, recycled paper, and granulated plastic.
This document outlines the process for producing pellets from Tetrapak and waste pulper materials. The focus is on converting waste into reusable forms such as RDF pellets, recycled paper, and granulated plastic.
Input Materials
The primary input materials include Tetrapak and paper pulp waste from the paper industry. These materials are processed to extract valuable components for recycling.
The primary input materials include Tetrapak and paper pulp waste from the paper industry. These materials are processed to extract valuable components for recycling.
Output Materials
The process results in several output materials:
The process results in several output materials:
- RDF Pellets: Refuse-derived fuel pellets that are densified for energy recovery.
- Recycled Paper: Paper materials are processed and returned to the paper mill for reuse.
- Granulated Plastic: Plastic components are separated and granulated for further use.
Process Overview
The document details the procedures for separating and processing the input materials to achieve the desired outputs. This includes mechanical separation, pulping, and densification techniques.
The document details the procedures for separating and processing the input materials to achieve the desired outputs. This includes mechanical separation, pulping, and densification techniques.
Recommendations and Best Practices
To optimize the recycling process, the document recommends:
To optimize the recycling process, the document recommends:
- Efficient sorting of input materials to maximize recovery rates.
- Regular maintenance of machinery to ensure consistent output quality.
- Adherence to environmental standards to minimize waste and emissions.
See more
Catalog excerpts
FROM TETF WASTE PULINPUT MATERIAL • Paper pulp waste from paper industry • Tetrapak pulper Recycled paper back to the paper mill Granulated plastic
Open the catalog to page 1All Promeco S.p.A. catalogs and technical brochures
RDF PRODUCTION PLANTS1 Page
CARDBOARD RECYCLING PLANT2 Pages
EMERGENCY SHELTERS1 Page
CHEMICAL RECYCLING1 Page
CONTINUOS MELT FILTER PF1 Page
PROMECO ECODRYVER PED1 Page
PROMECO CENTRIFUGE PEC1 Page
BAG OPENER PROMECO PBO1 Page
PROMECO DENSIFIER1 Page
Related Searches
- Solids separator
- Screening unit
- Centrifugal classifier
- Waste shredder
- Liquids separator
- Screw extruder
- Pelletizer
- Primary shredder machine
- Single shaft shredder machine
- Cascade separator
- Vertical centrifuge
- Laboratory centrifuge
- Twin screw extruder
- Plastic shredding machine
- Paper shredder
- Filtration system
- Benchtop centrifuge
- Recycling screening machine
- Air separator
- Water separator
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.