- Catalogs
- Progressive Components
- Graphite Plugged
Graphite Plugged
1 / 1 PageView full catalog
Graphite Plugged
Product catalog summary
Overview: This document provides technical specifications for side locks with graphite plugs, detailing dimensions, tolerances, materials, and usage instructions.
Specifications:
- All dimensions and tolerances are in millimeters.
- Material hardness is specified as 56-60 HRC using YK30 steel.
- Graphite plugs are used for lubrication, and grease should be avoided to maintain functionality.
Dimensions and Tolerances:
- Standard tolerances are provided for various dimensions, such as width (W), height (H), and depth (D).
- Specific tolerances include: 0.5mm, -0.5, -0.7, +0.0, -0.1.
Product Catalog:
- Products are listed with catalog numbers, dimensions (l, d, t, w, c, h, s1, s2, s, r, z), and screw sizes.
- Examples include SLpM16X20, SLpM20X25, SLpM25X32, etc., with corresponding dimensions and screw specifications.
Usage Recommendations:
- Use a light 20 weight oil at startup for lubrication instead of grease.
- Screws are included with each product.
See more
Catalog excerpts
SIDE LOCKS GRAPHITE PLUGGED Note: All dimensions and tolerances are in millimeters. Screws included. Using grease will inhibit the function of the graphite plugs. Instead, use a light 20 weight oil at startup to begin lubrication.
Open the catalog to page 1All Progressive Components catalogs and technical brochures
blade-ejectors-inch1 Page
air-valves-poppets1 Page
fittings-tees-elbows1 Page
angle pins1 Page
bar locks4 Pages
RTI® SHOULDER BUSHING1 Page
RTI® SUPPORT PILLAR1 Page
RTI® 08/10 SERIES1 Page
RTI® Complete1 Page
RTI® Guide Pin Bushing1 Page
RTI® Mold Straps1 Page
RTI® Frame - 08/10 Frame1 Page
RTI® T-Handle1 Page
RT series4 Pages
plate locks4 Pages
extended sprue bushings1 Page
Baffles - Straight1 Page
DT Series -4 Pages
Taper Locks1 Page
Treated1 Page
Needle Bearing1 Page
Side Locks - General1 Page
Bronze Plated2 Pages
Spanner Wrench1 Page
Replacement Liners1 Page
Bushings shoulder style1 Page
Straight Leader Pin1 Page
Z-Series - Inch1 Page
Standard1 Page
Solid Bronze1 Page
Archived catalogs
Pins18 Pages
Alignement18 Pages
General Components24 Pages
Software and Literature5 Pages
Electrical14 Pages
Rapid Tooling22 Pages
Cooling24 Pages
Mold Action36 Pages
Program Overview6 Pages
Alignment18 Pages
IMT Catalogue v.82 Pages
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.