- Catalogs
- Progressive Components
- angle pins
angle pins
angle pins
- Angle Pins: Available in nominal diameters of 3/8, 1/2, 5/8, and 3/4 inches. Each size has specific catalog numbers and dimensions for diameter (d), length (l), head radius (r), press fit length (p), and angle depth (y).
- Urethane Retainers: Maximum slide weight is 25 lbs, and the maximum operating temperature is 150˚ F (65˚ C).
- Angle pins can be ordered with a full radius by specifying the APR prefix. Example: APR500L6.500 indicates a 1/2” diameter pin machined to 6.5” long with a full radius.
- Do not countersink tapped holes to ensure proper clearance for dowel pin travel.
- Retainer specifications include a 1/4 x 3/4” shoulder bolt and a 1/4ø x 1-1/4” dowel pin.
- Material specifications include surface hardness of 50-54 HRC for certain components.
- Ensure correct specification of angle pins and retainers to match application requirements.
- Consider alternative configurations for specific needs, such as full radius options.
Catalog excerpts
cam actions, slide components angle pins m 8620 h Surface: 50-54 HRC catalog number Nominal Diameter Alternative configurations available: Head Radius Angle Pins Special Order • Full radius option can be ordered by specifying the APR prefix as outlined at right. Example: APR500L6.500 (no dashes/spaces) is an Angle Pin with a 1/2” diameter machined to 6.5” long with a full radius. P will be 1.37” per table above. Full Radius L7.244 Length Specified to 3 decimals Clearance for dowel pin travel Technical Details • Maximum slide weight for retainer weight: 25 lbs. • Maximum operating temperature is 150˚ F (65˚ C). .32 Do not countersink tapped hole catalog number
Open the catalog to page 1All Progressive Components catalogs and technical brochures
blade-ejectors-inch1 Page
air-valves-poppets1 Page
fittings-tees-elbows1 Page
bar locks4 Pages
RTI® SHOULDER BUSHING1 Page
RTI® SUPPORT PILLAR1 Page
RTI® 08/10 SERIES1 Page
RTI® Complete1 Page
RTI® Guide Pin Bushing1 Page
RTI® Mold Straps1 Page
RTI® Frame - 08/10 Frame1 Page
RTI® T-Handle1 Page
RT series4 Pages
plate locks4 Pages
extended sprue bushings1 Page
Baffles - Straight1 Page
DT Series -4 Pages
Taper Locks1 Page
Treated1 Page
Needle Bearing1 Page
Graphite Plugged1 Page
Side Locks - General1 Page
Bronze Plated2 Pages
Spanner Wrench1 Page
Replacement Liners1 Page
Bushings shoulder style1 Page
Straight Leader Pin1 Page
Z-Series - Inch1 Page
Standard1 Page
Solid Bronze1 Page
Archived catalogs
Pins18 Pages
Alignement18 Pages
General Components24 Pages
Software and Literature5 Pages
Electrical14 Pages
Rapid Tooling22 Pages
Cooling24 Pages
Mold Action36 Pages
Program Overview6 Pages
Alignment18 Pages
IMT Catalogue v.82 Pages