^ For Use in R&D • Pharmacy Compounding • Nutritional Supplements • Foods ProMixer 3DH™ vs other 3D Mixers ProMixer 3DH is an improved version of Swiss 3D or 3 Axis Mixers from the makers of the ProFiller capsule • Ergonomic handle to hold during mixing and an extra-wide Stainless Steel (Inox) base for stability. No need to clamp. • Made from GMP compliant materials. No powder coated or plated parts. • Includes 1.5L, 2.0L plastic jars and rubber straps. • Optional Flexible Brush is supplied with a jar & lid for mixing of small vials, jars, flasks, tubes, etc. • Cage designed to prevent optional flexible brush from slipping when it is used without a jar. • Optional accessories: Flexible brush & jar for mixing vials, Unguator® jars, etc.; set of 3 Inox (stainless steel) balls for breaking up powder lumps; and 2 C-clamps to secure the 3DH to a table. Brush & Jar SS316 Balls C-Clamps Overview • The 3DH Manual ProMixer™ is a fast, low-cost tumble mixer that homogenizes powders of different particle sizes, shape and density; liquids of different viscosities; solutions and suspensions. • Typical mixing time is 2-3 minutes. • Helps ensure uniform mixing from batch to batch and operator to operator. • Mixing is based on three-dimensional inversion kinematics, also known as the Paul Schatz principle. Mixing Speed & Time • Mix at same speed as you hand-mix a cake or similar batter e.g. approximately 45-60 rpm or less than 1 rotation a second. • High speed mixing is not required or recommended for mixing powders. • Tumble mixing is a gentle method of mixing ingredients at low rpm to avoid reducing the particle size. For powder mixing allow 2-3 minutes at 45 to 60 rpm or approximately 90-120 revolutions for a uniform blend. • For mixing soluble powders and liquids a higher rpm is recommended. Recommended Container Sizes • Supplied with one 1.5L and one 2.0L cylindrical plastic jars. • Fully compatible with Inversina* jars and containers that fit in the Inversina* Mixer. • Jars from 80-118mm in diameter and up to 210mm in height may be used. See Table on reverse. • Optional flexible brush insert and jar enables mixing in small vials, jars, flasks and test-tubes. Information on Optional Accessories, Dimensions and Jar Sizes see reverse. "Inversina is manufactured by Bio-Components, Switzerland. Unguator® is a trademark of GAKO Konietzko GmbH. For Automated Powder Mixing up to 10L Torpac Europe B.V., Jan Campertstraat 19,6416

3DH Manual Mixer / Blender System Item Description Item # System 3DH Mixer Base, Stainless Steel (Inox) Jar Cage, 1.5L & 2.0L Jars (PET with Polypropylene Lid.) & 2 Rubber Straps. Shipping Weight: 12 kg (27 lbs) Optional Accessories Flexible Brush, Jar & Straps. Flexible Brush with jar lid and straps. Flexible brush fits inside the jar and allows for safe mixing of small vials, Unguator® jars, flasks, tubes, etc. Stainless Steel (Inox) Balls Three 20 mm diameter balls to break up lumps in fine or hygroscopic powders. May not break up all lumps and may require up to 500 revolutions. Table Bolts...