The Aquapack packaging machines produced by Proffico are designed to pack drinking water in plastic bags. The idea of the packaging machine has been taken from the experience of Swiss and German companies, which install such equipment at the main water treatment plants. Packaging machines are especially suitable in case of failure of water supply systems or other emergency situations, because they provide a guarantee of continuity of bacteriologically safe water supply. The solutions used so far, i.e. water transport in cisterns and barrels, have in most cases been problematic because, due to...

Aquapack packaging machines can be installed at a local water treatment plant or in any other suitable location with access to the water supply network. The bags are packed with tap water that meets the requirements of the Regulation of the Minister of Health on the quality of water intended for human consumption. The shelf life of water packed in plastic bags should not exceed 6 months and the bags themselves should be stored in a dry, dark and cool room. Water bags are made of 100% top quality polyethylene. This material is fully recyclable and can be recycled many times for other products....

7> AQUAPACK PACKING MACHINE 2.1 The Aquapack packing machine 2.1 is the most efficient model. It is made of stainless materials and its design ensures the microbiological purity of the product. Both the drinking water and the packaging foil are subject to continuous disinfection - ultraviolet radiation. Machine control and adjustment of settings (capacity and dosage) are carried out by means of the SIEMENS controller from the operator's panel, which additionally displays information about the machine's operating status. The applied automatic dating device allows to determine the date of production...

The Aquapack packing machine 2.2 is also manufactured from materials that ensure the microbiological purity of the product and the fittings and components used come exclusively from reputable manufacturers. Both the drinking water and the packaging foil are subject to continuous disinfection - ultraviolet radiation. The machine is controlled from the control panel and the settings (capacity and output) are adjusted manually. Used automatic dating device allows to determine the date of production or shelf life of packaged water. TECHNICAL SPECIFICATION Manufacturer, type: Hygiene certificate for...

P AQUAPACK PACKING MACHINE 2.3 The packaging machine is designed for manual packaging of drinking water in bags with a capacity of 1.0 dm3 to 15 dm3. The housing of Aquapack 2.3 is made up of a frame made of sections enclosed and powder coated. At the back of the frame there is a water preparation unit for packaging, consisting of: main valve, reducer with the possibility of reducing input pressure, water filter, UV lamp for water disinfection, disinfection chamber for plastic bags and control cabinet. The front part of the unit is a worktop with a drip tray made of stainless steel, built on...

Aquatrans trailers are designed to transport bags of drinking water to the place of the final recipient. Aquatrans has drawers with snap fasteners and a thermal casing, thanks to which the temperature of water and its taste are not deteriorated. Transportation in such trailers is completely safe, with proper cleanliness and aesthetics. The trailer is a self-supporting structure, on a single-axle chassis, adapted for pulling by a passenger car equipped with a towing hook. Aquatrans has an approval certificate allowing it to be registered and used in accordance with the law in force (the approval...

PACKAGERS of the AQUAPACK series were installed, among others in the following Waterworks companies: Municipal Waterworks in Radom, Waterworks in Starachowice, Waterworks in Ciechanow, Municipal Company in Kozienice, Municipal Waterworks in Rzeszow, Waterworks in Minsk Mazowiecki. Municipal Waterworks in Warsaw, Waterworks in Zagan, Waterworks in Wyszkow, Waterworks in Gliwice, Municipal Waterworks in Chojnice. Commercial Office and Service: