PROEX TECHNOLOGY PROEX TECHNOLOGY BYD SeriesExplosion-proof Emergency Exit Light Fittings BYD SeriesExplosion-proof Emergency Exit Light Fittings Technical Parameters Model Implica Pcvac Explosion-proof emergency exit light fittings Applications O Explosion protection to CENELEC. IEC. NEC. O Can be used in Zone 1 and Zone 2 Zone 21 and Zone 22 Class I, Zone 1 and Zone 2 Class l; Division 1, Groups C, D O Lighting both in normal condition and emergency condition; When power supply is cut off/the emergency device starts to work; with overcharge, over discharge protec tion and short circuit protection. O Designed with test button and sleep button. The test button is for testing. Press the button,lamp shall automatically enter into emergency status. The sleep button is to stop the lamp source output, press this button, the lamp turned off, re-press the button,lamp on and return to work. O Equipped with specialized hinge structure, which can prevent the flameproof joints from damage when opening and closing the box, and greatly prolong the service life of box. O Ultra-bright LED lamp, low power consumption and long service life up to 50,000 hours; energy saving and environmental protection. Global(IECEX): Ex db MB T6 Gb, Ex db IIC T6 Gb, Ex tb MIC T80°C Db Europe(ATEX): ©II 2 G Ex d e q IIC T4 Gb. <Ex> II 2 D Ex tb INC T80°C Db IP66 O Certificates: IECEX, ATEX, CNEX, CU-TR O Enclosure Material: Copper-free Aluminum Alloy, powder coated surface, yellow(RALl 021) Exposed Fastener: Stainless Steel O Rated voltage: 100-300V AC, 100-250V DC, 12-48V DC O Power: 4W Led O Battery capacity: 800mAh O Charging time: 16h O Emergency time: 180min O Ambient temperature: -40°C~+60°C, -60°C~+60°C O Cable entries: 2 - M25xl.5 plugs O Weight: 5.15kg Sign code type A-G EXIT Dimension drawings (all dimensions in mm) - subject to alter