PROEX TECHNOLOGY PROEX TECHNOLOGY Explosion-proof Light Fittings Explosion-proof Light Fittings Technical Parameters Model Implication L: pole type D: pendant chain type (only for single-lamp light fitting) G: pendant pole type B: wall type (only for dual-lamp light fitting) I II III Lamp power(W) LED: only for LED lamp Explosion-proof light fittings Applications ◇ Explosion protection to CENELEC、IEC、NEC. ◇ Can be used in Zone 1 and Zone 2 Zone 21 and Zone 22 Class I, Zone 1 and Zone 2 Class I, Division 2, Groups A, B, C, D ◇ Available lamp and power: T8 Fluorescent Lamps:18Wx2, 36Wx 2, 58W x 2 T5 Fluorescent Lamps:14Wx2, 28Wx2, 35W x 2 LED lamps: 9W x 2,18W x 2, 28W x 2 ◇ Built-in electromagnetic ballast(Electronic ballast is optional, please specify when ordering). ◇ Built-in LED driver, wide voltage input,CC-CV(constant current -constant voltage) output. ◇ Enclosure in Copper-free Aluminium Alloy, powder coated surface,yellow (RAL1021). ◇ End of lamp life (EOL) rectification effect protection. ◇ Emergency functions are available on request Dimension drawings (all dimensions in mm)-subject to alteration Lamp type ◇ Explosion-proof mark：Global(IECEX): Ex db IIBT6 Gb Ex db IIB+H2 T6 Gb Ex tb IIIC T80℃ Db IP66 Europe(ATEX): II 2 G Ex db IIBT6 Gb II 2 G Ex db IIB+H2 T6 Gb II 2 D Ex tb IIIC T80℃ Db IP66 ◇ Certificates：IECEX, ATEX, CNEX, CU-TR ◇ Conformity to standards: EN 60079-0,EN 60079-1,EN 60079-31 IEC 60079-0, IEC 60079-1, IEC 60079-31 ◇ Protection grade：IP66 ◇ Enclosure Material: Copper-free Aluminum Alloy ◇ Wire guard: Powder coated carbon steel (white) or stainless steel ◇ Exposed Fastener: Stainless Steel ◇ Rated voltage: T8/T5: 100-305V AC 50/60Hz ◇ Rated power: T8 Fluorescent Lamps:18Wx2, 36Wx 2, 58W x 2 T5 Fluorescent Lamps:14Wx2, 28Wx2, 35W x 2 LED lamps: 9W x 2, 18W x 2, 28W x 2 ◇ Ambient temperature: Ex db IIB+H2 T6 Gb for Tamb:-20℃~+55℃℃ Ex db IIB T6 Gb and Ex tb IIIC T80℃ Db IP66 for Tamb:-60℃~+55℃ Cable entries: 2-M25x1.5 plugs ◇ Terminal: 3 x1.5~4mm²(L+N+PE) ◇ Earth protection: M5(Internal and external earth bolt) ◇ Emergency unit: Special emergency controller and battery pile, with protection against overcharge and over discharge ◇ Emergency power (W): 36W x 30%,58W x30% ◇ Emergency start time: 0.3s ◇ Emergency charging time: 24h ◇ Emergency lighting time: 120min (180min is optional) ◇ Mounting: pendant chai

(ProEx)BYD Series PROEX TECHNOLOGY Explosion-proof Light Fittings Mounting type for light fittings with dual lamp tube (all dimensions in mm) - subject to ateration Installation reference Explosion-proof Emergency Exit Light Fittings B - Ex Lighting 2-®B.S Model Implicati Sign Code: A~G - G: pendant pole type Mounting -X: ceiling type Explosion-proof emergency exit light fittings Applications O Explosion protection to CENELEC.IEC.NEC. O Can be used in Zone 1 and Zone 2 Zone 21 and Zone 22 Class l, Zone 1 and Zone 2 Class l, Division 1, Groups C, D O Lighting both in normal condition and emergency...