WTR-PIR
4Pages

Produal Proxima® WTR - wireless room transmitter Produal Proxima® WTR battery powered wireless transmitters are for detecting indoor temperature, humidity and CO2 level. The transmitters can also be equipped with a display, advanced setpoint knob, setpoint knob, and occupancy detection. Transmitters are compatible with the Produal Proxima® MESH wireless network. The information is transmitted to the base unit according to the base unit poll interval. Data may be additionally transmitted using change-of-value (COV) based transmission. COV means that the data is sent to base station after the value has changed enough. If COV based transmission is used, the required value change must be configured with Produal MyTool®. The wireless network needs one base unit. Commissioning is done by using Produal MyTool® smart phone application. Technical specifications Property Network frequency Network range (maximum distance between devices) up to 100 m in the line of sight, typically 10...20 m inside buildings Note: The maximum distance between devices depends on the installation environment. Temperature measurement Range Humidity measurement (RH models) Range CO2 measurement (CO2 models) Range Measurement interval Occupancy detection (PIR models) Detection area up to 13 meters See more information about the detection area from the chapter Detection area (PIR models) on page 2. Lens Display (D and AK models) Fresnel lens, high density polyethylene Monochrome LCD display Produal Oy | Keltakalliontie 18, FI 48770 Kotka, Finland | tel. +358 10 219 9100 | fax. +358 5 230 9210 | info@produal.com Information is subject to change without prior notice. EN - 54

Commissioning tool Produal MyTool® Operating conditions Temperature on the wall surface or on the standard flush mounting box (60 mm hole spacing) Detection area (PIR models) Powering WTR WTR models have a battery for power supply. The devices are delivered with a battery that is disconnected by using a disconnecting strip. Open the cover and remove the strip to enable the power supply for the device. CAUTION: There is a risk of explosion if the battery is replaced by an incorrect type. Use only battery types that are defined by Produal. Contact Produal sales to get more information about...

Ordering information Wireless room transmitter Device type Body colour Battery powered wireless temperature transmitter No display Advanced setpoint knob with display, menu button Setpoint knob Setpoint knob with custom print Display, menu button Additional measurements Black Display Relative humidity -RH Occupancy detection (not with -PK) -PIR Relative humidity and occupancy detection (not with -PK) -RH-PIR CO2 and relative humidity (not with -PK) -CO2-RH CO2 and occupancy detection (not with -PK) -CO2-PIR CO2, relative humidity and occupancy detection -CO2-RH-PIR (not with -PK) For...

Supported standards and directives Standard Radio Equipment Directive (RED). Restriction of Hazardous Substances (RoHS2) Directive. Commission Delegated Directive, amending Annex II to Directive 2011/65/EU. Classification of radio equipment: Class 1, Wideband data transmission systems (Subclass 22). Safety of information technology equipment. Wideband transmission systems; Data transmission equipment operating in the 2,4 GHz ISM band and using wide band modulation techniques; Harmonised Standard covering the essential requirements of article 3.2 of directive 2014/53/EU. Electromagnetic...