Procompactor Semi Trailer Waste Compactor 55-60 cbm Procompactor design and develops waste management equipments. Procompactor Semi Trailer Garbage Equipment is mostly used for transferring the solid waste to long distance facilities. Thanks to its capacity, smaller garbage trucks can load their load to such trailer equipment to save time and gas thus sustain the collection of solid waste in operation at all times. PRO60 self-contained semi-trailer is designed and manufactured for the transport of dry waste or moist waste. The compact finished system can be continuous or discontinuous with a compression ratio of 1:6. PRO 60 semi-trailer is suitable for the storage and transportation of all kinds of waste that can reach a load capacity higher than the allowable level compared to the mobile floor thanks to its compaction system. The PRO60 belt system, combined with our Ejection/Discharge Plate made of high-strength and tough metals, proves to be an excellent transport transfer station, saving many long trips to smaller capacity compactors for picking towards reject destinations. Body upfit consists of a body and its subframe mounted on a truck chassis, a tailgate with compaction mechanism, discharging/ejection plate inside the body, bin lifter device, hydraulic and electrical components and their installation on garbage compactor. www.procompactor.com - mail:[email protected]

Technical Specs: • LENGTH 13.50 m • Axle, Suspension, Brake and Accessories • 3x16 Tons Axle Set, Double Tire, Made in Turkey • Axle Center Dimensions maximum 1320-1,400 mm • 14 Layer Leaf Spring • Air Brake. • 12.00 R 22.5 Tire: 12+1 Load Index 4500 Kg. • Landing Gear: Mechanical • King Pin : 2” MPD Brand Made in Turkey • King Pin Ground Height: 1,250-1,350 mm • 6 Lt Fire Extinguisher Box: 1 Piece • Wheel Choke: 2 Pieces • Spare Wheel : Pipe Type • Side Protection: Steel Profile • Electricity: 12 V Euro Standard 2-7 pins; Central and Eastern Europe 24 Volt • Electrical Set: Saba Brand E Certificated...

• Oil Tank 250 Lt • Hydraulic System According To "Cetop" Standards • 12v Dc Electrical System And Electronic Board • Operation In Manual Or Automatic Mode • Anti-Tipping Compaction Shovel, Inserted In A Sliding Guide; Lateral Stability Ensured By Polizene Stripes • New From The Factory Technical Specifications Capacity (m3) 60+3 m3 excluding tailgate (hopper) Body Floor Hardox / 5mm. Body Side walls:St-52 / 5mm. Body Roof St-52 (S355J2) / 5mm. Length: To Be Confirmed By Drawing Upon Confirmation Chassis: 3 Axles Tires 315/80 R22.5 Case: High Resistance Steel With Differentiated Thicknesses Painting:...

Ejection/Discharging Plate a. Discharging plate moves on the rail welded above from the floor to the inner sides of the body b. Discharging plate moves by means of double acting telescopic cylinder. It is kept at the rear of the body when it is empty and moves automatically to the front of body by pressure valve as the garbage is started packed and pressed inside body. c. from St-37 (S255JR) + St-52 (s355jr) steel Container Lifting Devices/Bin lifter device Suitable to take and empty 120 - 240 - 1100 liter plastic + 1100 liter metal bin / container lifting mechanism (plastic comb system) (from...

Materials Used Part Of The Semi-Trailer Thickness Material Body Floor: Hardox 5 Mm Side Plate: St-52 3 Mm Reinforcementsst-52 2.5 Mm Rear Tailgate: St-52 : Mm Compaction / Expulsion Shovel: St-52 3 Mm www.procompactor.com - mail:[email protected]