cad

TD20-013-1.0
2Pages

{{requestButtons}}

Catalog excerpts

TD20-013-1.0 - 1

MENTOR TD20-013-1.0 FIXED REFRIGERANT IDENTIFIER TECHNICAL DATA SHEET The ‘Mentor’ Automotive Refrigerant Identifier utilizes state-of-the-art NDIR (Non-Dispersive Infrared) technology for the identification of refrigerant gases in automotive air-conditioning systems. The Mentor has been developed with over 30 years of experience in the design and production of safety critical gas analysis systems recognized globally as the best in the market for accuracy and quality. Mentor bezel mount internal unit • One identifier accurately analyses both R134a and R1234yf for purity • Identifies R1234yf, R134a, R12, R22, HC and Air as contaminants • SAE J2927 Certified • For use with SAE J2843 or SAE J2851 certified Automotive AC Service equipment • PC software allows for simple setting to VDA or SAE mode • Five year oxygen sensor • Replaceable Oil Contamination indicator in front panel • Minimal loss of refrigerant during test • USB or RS232 communications Mentor direct mount internal unit BENEFITS The Mentor refrigerant identifier plays an important role in helping to protect automotive air conditioning systems and service and recovery equipment from potential damage caused by the potential, and unknowing use of illegal refrigerants. The recovery of contaminated refrigerant can damage expensive service and recovery equipment, potentially leading to expensive repair bills or even scrappage. Mentor will prevent contamination of your refrigerant supply from illegal contaminants from refrigerant cylinders and customer vehicles, therefore stopping cross contamination of other vehicles with these illegal contaminants. Status Scientific Controls Ltd. www.refrigerantidentifier.com

Open the catalog to page 1
TD20-013-1.0 - 2

MFMTOR TD20‘013‘1-0 FIXED REFRIGERANT IDENTIFIER TECHNICAL DATA SHEET R1234yfand R134a Vapour only Less than 5 grams per test +100C to +490C NDIR - Non-Dispersive Infrared 2 minutes after power on 5 years Typically, 140 seconds USB 3.0 and RS232 5 tests 0.6 kg (1.3 lb) SAE J2927, UL 61010, CE, EMC SPECIFICATIONS Refrigerants and other vapours identified Sample type Sample weight Operating temperature range Sensor type Sensor stabilization time Expected air sensor lifetime Test cycle time (purge + test) Communication portal Stored test results capability Weight Approvals TEST RESULTS The USB...

Open the catalog to page 2

All Process Sensing Technologies catalogs and technical brochures

  1. CDP301

    4 Pages