PD 802 COPP DPI • Process Automation Controller • Programmable in COPP • P-NET via Light-Link, RS485 and Ethernet • Dual 100 Mbit Ethernet switch • USB Interface • 256 MByte RAM, 16 MByte Flash, 32 KByte MRAM • Battery Backup • Micro SD-Card slot • Wide Temperature range • Wide Power Supply range • Low Power Consumption A PD 802 DPI is used to provide programmable intelligence for the local cluster via various communication interfaces: P-NET Light-Link, P-NET RS485 and two Ethernet ports using P-NET via UDP. The device is programmable in COPP, which means that a part of, or complete automation application can be built and downloaded by the user. The program can make use of ready-made components to control and monitor any process or machine application, both locally in the device but also via the network interacting with other devices. PD 802 is used with the BM 103 base module that provides the power supply connection and connection for all the communication interfaces. The device can be fixed to the base module by means of a screw. ...continues PROCES-DATA A/S • NAVERVEJ 8-10 • DK-8600 SILKEBORG • Tel. +45 87 200 300 • www.proces-data.com PROCES-DATA A/S reserves the right to change specifi

BASE MODULE BM103 PD 800 series DPIs and I/O devices are made up of two parts: The Terminal Base Module and the Electronics Device. The Terminal Base Modules are snap-locked directly on a DINRail and interlocks with neighboring modules to ensure stability. The Terminal Base Module has two terminals for all the channels for connection to the process signals, respecting the demand for only one wire in each terminal, ensuring a safe and straight forward design- and installation process. POWER RAIL A battery for backup and UPS is optional for BM 103. The base module is available with either spring...