SCOPE Repeater

Product catalog summary

Technical Specifications:
The COMbricks SCOPE Repeater supports up to 4 PROFIBUS networks, with modules positioned in the first 10 slots. It is powered through the backplane with a current consumption of approximately 400 mA, peaking at 555 mA. Compatible backplane units include models 101-200011, 101-200012, 101-200023, 101-200024, and 101-200027.

Protocol Specifications:
The repeater supports various protocols such as DP-V0, DP-V1, DP-V2, FDL, MPI, FMS, PROFIsafe, and PROFIdrive. It does not require a bus address and supports transmission speeds from 9.6 kbps to 12 Mbps, with auto-detection capabilities. Data delay times vary based on speed, with normal mode ranging from 2.0 TBit to 3.75 TBit and redundant mode from 12.0 TBit to 13.75 TBit.

Oscilloscope and Cable Specifications:
The oscilloscope operates at a frequency of 192 MS/s with a resolution of 50 mV and a differential range of -6.436 to 6.436 V. Cable lengths vary by speed, with a maximum of 1200 m at lower speeds and 100 m at higher speeds. The wire diameter for screw terminals is less than 1.5 mm², supporting both stranded and solid core types, with a maximum of 31 devices per channel.

Additional Features:
The repeater includes integrated termination, unlimited cascading depth, and redundancy support for up to 10 cables. It features various settings controlled by dipswitches and supports both hardware and software configurations. PROFIBUS connectors include screw terminals and a DB9 connector, with grounding options available.

Indicators and Alarms:
LEDs indicate module readiness, telegram reception, termination status, internal errors, and signal issues. Alarm values can be adjusted via the web server.

General Information:
The head station firmware requires at least version 1.260, with an operating temperature range of 0 to 60 °C. The unit weighs 120 g, and the MTBF is yet to be defined. Contact PROCENTEC for further information.

Catalog excerpts

COMbricks – SCOPE Repeater Technical Data Technical Data - SCOPE Repeater (101-201210) Technical Data - SCOPE Repeater (101-201210) Backplane PROFIBUS networks Modules Power supply Current consumption Compatible backplane units 4 (set by dipswitches or web server) 10 (positioned in the first 10 slots) Provided through the backplane ± 400 mA (555 mA max) 101-200011, 101-200012, 101-200023, 101-200024, 101-200027 Protocol specifications Supported Protocols DP-V0, DP- V1, DP-V2, FDL, MPI, FMS, PROFIsafe, PROFIdrive and any other FDL based protocol Address Transmission speed Transmission speed detection NO bus address required 9.6 kbps .. 12 Mbps (including 45.45 kbps) Auto detect (< 10 s detection and 50 s lost time) Data delay time (normal mode) 2.0 TBit at 9.6 kbps .. 3 Mbps 2.75 TBit at 6 Mbps 3.75 TBit at 12 Mbps Data delay time (redundant mode) 12.0 TBit at 9.6 kbps .. 3 Mbps 12.75 TBit at 6 Mbps 13.75 TBit at 12 Mbps Delay time jitter Oscilloscope specifications Frequency Resolution Differential range PROFIBUS cable specifications Cable lengths 1200 m at 9.6 kbps .. 93.75 kbps 1000 m at 187.5 kbps 400 m at 500 kbps 200 m at 1.5 Mbps 100 m at 3 Mbps .. 12 Mbps Wire diameter (for the screw terminals) Wire type Number of devices < 1.5 mm2 Stranded or solid core Maximum 31 devices per channel (busloads) _______________________________________________ Version 2.2.1 – June 2014 Page 1 / 2 COMbricks-TechData-SCOPE-Rep-T1-EN.docx © PROCENTEC 2014 - Copyright - all rights reserved

Open the catalog to page 1

COMbricks - SCOPE Repeater Technical Data Technical Data - SCOPE Repeater (101-201210) Cascading depth Integrated (switchable - PB RS 485 - 390/220/390 Ohms) No limit, only busparameter limitation of the master Yes, maximum 10 cables activated by switch LEFT LEFT RIGHT LEFT LEFT RIGHT RIGHT RIGHT PROFIBUS connectors RqKfltEr Module Dalai U^WLIJ PROFIBUS Network Hardware / Software Signal amptiule-of Screw terminals + DB9 connector (1-on-1) Green wire, Red wire Direct grounding Indirect grounding Module is ready for operation (ON) Receiving telegrams (blinking) Internal repeater error (contact...

Open the catalog to page 2

All PROCENTEC catalogs and technical brochures

Archived catalogs

Com Bricks
2 Pages
Profitrace
4 Pages