OxyTrans4 - 20 mA Loop Powered two wire Oxygen Transmitter for Glove Box applicationsTwo Wire Process Oxygenanalyzer The Model OxyTrans is simple, accurate and economic measurement of Oxygen at trace and % levels. A simple Display and one point calibration allow easy and fast start-up of the instrument. © One User specific measuring range The unit will offer with ranges between 0-10 ppm and 0 - 100% of oxygen. © Sensor The OxyTrans uses a special fuel cell to measure the oxygen concentration. The sensor meets the industrial requirements for accuracy, sensitivity, easy to use and operating life. © Calibration The calibration of the instrument for trace oxygen measurements in gas, should be done with a calibration gas. The concentration can be chosen freely within the measuring range. In the percent range the unit can calibrated with air. © Features s compact S inexpensive S Sensor with long operating life S IP65 enclosure s reverse voltage protection and temperature compensation © Flow-through measuring cell in Stainless Steel • The measuring cell is modular and is made of stainless steel • A defective measuring cell can be repaired by replacing the defective part only, rather than the complete unit

Response time Signal output Alarm value oxygen sensor • different sensors available • different Measuring ranges • 316 SS Stainless steel Cell block with KF40 Flansh : 10 - 35 VDC reverse voltage protection up to 40VDC : 6 Digits, alphanumeric with bar graph : Micro-Fuell Cell, ( uber alles ) • Semi conductor industry • Metallurgical industries • Chemical industry e-mail: [email protected]