OxyTrans 100 4 – 20 mA Loop Powered two wire Oxygen Transmitter SIL 2 Two Wire Process Oxygenanalyzer The Model OxyTrans is simple, accurate and economic measurement of Oxygen at trace and % levels. A simple Display and one point calibration allow easy and fast start-up of the instrument. optional  One User specific measuring range The unit will offer with ranges between 0 – 100% of oxygen.  Sensor The OxyTrans uses a special fuel cell to measure the oxygen concentration. The sensor meets the industrial requirements for accuracy, sensitivity, easy to use and operating life.  Calibration The calibration of the instrument for trace oxygen measurements in gas, should be done with a calibration gas. The concentration can be chosen freely within the measuring range. In the percent range the unit can calibrated with air.  Features      compact inexpensive Sensor with long operating life IP65 enclosure reverse voltage protection and temperature compensation  Flow-through measuring cell in Stainless Steel   The measuring cell is modular and is made of stainless steel A defective measuring cell can be repaired by replacing the defective part only, rath

Measuring ranges % : 0 – 100 % O2 Other ranges on request 316 SS Stainless steel Cell block Response time Operating Temperature Signal output Hydrogen applications Alarm value Metallurgical industries : 10 – 35 VDC reverse voltage protection up to 40VDC Chemical industry heat treating and bright annealing : 6 Digits, alphanumeric with bar graph oxygen sensor Pro-Chem Analytik GmbH & Co.KG Neuer Bruchweg 1, 46509 Xanten Tel.: 02801/ 98510-70 Fax: 02801/ 98510-71 e-mail: [email protected]