CHEMANALYTIKportable Oxygen measurement Oxygenmeasurement for % range This Model was made for fast, accurate and economic measurement of Oxygen at trace or percent levels. A simple operating and a large LCD-display allow easy and fast start-up of the instrument. The Unit is measuring Oxygen between 0 - 10000 ppm or 0 -25%. The user get a range of 0 - 25% of oxygen © Data outputs © Benefits • Compact economic instrument • Sensor with long operating life. • No range switching required • optional with gas sampling pump or flow meter • rechargeable Battery For the Oxygen concentration there is a 4-20 mA output standard available. The Oxymaster uses a special fuel cell to measure the oxygen concentration. The sensor meets the industrial requirements for accuracy, sensitivity, easy to use and operating life. © Flow-through measuring cell in Stainless Steel • The measuring cell is modular and is made of stainless steel • A defective measuring cell can be repaired by replacing the defective part only, rather than the complete unit © Calibration The calibration of the instrument for trace oxygen measurements in gas should be done with a calibration gas. The concentration can be chosen freely within the measuring range.

Measuring range Resolution Response time Operating Temp. Pressure Outputs Display Oxygensensor Sensor warranty Expected sensor life • Variety of sensors available or can be used • Data tracking, • universal Power supply for charging 85 - 230 VAC 50 - 60 Hz • battery powered : +/- 2% Reading ( T= const.) +/- 5% Reding over full temperature range : 0,1 % oxygen battery powered : Micro-Fuell Cell, : 6 month under normal use and maintenance • Metallurgical industries • Chemical industry Pro-Chem Analytik GmbH & Co.KG, Timmermannsweg 1,46509 Xanten Tel.: 02804/ 9101-47 Fax: 02804/ 9101-48 e-mail:...