
Oxygen- and Humidity-measurement in one unitDewpoint- and Oxygen measurement This Model was made for fast, accurate and economic measurement of Oxygen and Dewpoint at trace levels. A simple menu-driven software, touchpad and large LCD-display allow easy and fast start-up of the instrument. The Unit is measuring simultan Dew points between -100°C und+20°C and Oxygen between 0 - 10000 ppm. © User-selectable measuring range The user can select any range within the 0 - 10000 ppm and -100°C - +20°C dewpoint. Free-programmable concentration alarm and a system alarm give versatility meeting almost any requirement. © Data outputs For the Oxygen concentration and the Dewpoint are 2 x 4-20 mA output standard available. Other outputs are available on request. RS485 is an option. © Benefits • Compact economic instrument with sensor separate from the electronics • Sensor with long operating life. • No range switching required Instructions and error messages in normal text (eg calibration not OK, change measuring cell) © Flow-through measuring cell in Stainless Steel • The measuring cell is modular and is made of stainless steel • A defective measuring cell can be repaired by replacing the defective part only, rather than the complete unit © Sensor with long operating life The Oxymaster uses a special fuel cell to measure the oxygen concentration. The sensor meets the industrial requirements for accuracy, sensitivity, easy to use and operating life. To measuring the Dewpoint, the unit use an Aluminiumoxid probe. © Calibration The calibration of the instrument for trace oxygen measurements in gas, should be done with a calibration gas. The concentration can be chosen freely within the measuring range.
Open the catalog to page 1Measuring range Dewpoint range Response time Operating Temp. Pressure Outputs Display Oxygensensor Sensor warranty Expected sensor life • Variety of sensors available or can be used • User programmable measuring range • Output signal: 4-20 mA for Dewpoint • Clear text graphic display • Data tracking, temperature reading • Instructions and error messages in normal text • universal Power supply 85 - 230 VAC 50 - 60 Hz : 0 - 10000 ppm O2 free programable lowest range 0-10 ppm : -100 - +20°C dewpoint free programmable over full temperature range ( bei 0 -10 ppm +/- 1 ppm) : Self diagnostics with...
Open the catalog to page 22 Pages
2 Pages
2 Pages
2 Pages
2 Pages
3 Pages
2 Pages
2 Pages
2 Pages
2 Pages
2 Pages
2 Pages
2 Pages
2 Pages