Oxymaster II 16TMeasuring Oxygen Trace in Gas Process Trace Oxygen Analyzer The Model Oxymaster was made for fast, accurate and economic measurement of Oxygen at trace levels. A simple menu-driven software, touchpad and large LCD-display allow easy and fast start-up of the instrument. © User-selectable measuring range The user can select any range within the 0 -10000 ppm. Free-programmable concentration alarm and a system alarm give versatility meeting almost any requirement. © Data outputs and Data logger For the Oxygen concentration is a 4-20 mA output standard available. Other outputs are available on request. RS232 for data reading is standard. A data logger with 10000 values is included. © Customer The Oxymaster can be used as a stand alone unit, but a complete, custom made, system with sample handling is also supplied by us. Optional it is possible to have the Oxymaster as two channel unit with a second measuring cell. © Benefits • Compact economic instrument with sensor separate from the electronics • Sensor with long operatiing life. • No range swichting requiredInstructions and error messages in normal text (eg calibration not OK, change mesuring cell) © Sensor with long operating life The Oxymaster uses a special fuel cell to measure the oxygen concentration. The sensor meets the industrial requirements for accuracy, sensitivity, easy to use and operating life. © Flow-through measuring cell in Stainless Steel • The measuring cell is modular and is made of stainlesss steel • A defective measuring cell can be repaired by replacing the defective part only, rather than the complet unit © Calibration The calibration of the instrument for trace oxygen measurements in gas, should be done with a calibration gas. The concentration can be chosen freely within the measuring range

Measuring range Response time Sample pressure Output signal Systemdiagnostics Voltage Oxygensensor Sensorwarranty Expected sensor life : 0 - 10000 ppm O2 free programable lowest range 0-10 ppm over full temperature range ( bei 0 -10 ppm +/- 1 ppm) : 1 free programable Alarm : Selfdiagnosis with relay output : Micro-Fuell Cell, Typical • Variety of sensors available or can be used • User programmable measuring range • Output signal: 4-20 mA for Temp. (opt.) • Selfdiagnosis with relay output • Clear text graphic display • Data tracking, temperature reading • Instructions and error messages in normal...