RSV EH230/350 datasheet Mid Capacity PowerDoor autoclaves The POWERDOOR range of autoclaves satisfies a demand for autoclaves with a large rectangular sterilising chamber suited to handling bulky items but where the laboratory does not have sufficient space to allow for the conventional hinged door opening. With the Priorclave PowerDoor range the chamber door lowers within the body of the actual machine, thereby enabling laboratories to acquire an autoclave suited for high throughput sterilising procedures or able to handle extra bulky items despite restricted room size. The Mid-Capacity range is produced in two chamber sizes of 230 and 350 litres and can be supplied as standard format or with a fascia panel. Push-Buttons control the hands free opening and closing of the vertically sliding pressure door. An advantage of the PowerDoor autoclaves is a fixed gasket onto which the door closes. When raised in line with the chamber opening, the door automatically moves forward directly onto the seal to create an air-tight lock. This action prevents undue wear on the fixed seal, extending service intervals and improving operational performance of these autoclaves. Key Features • Special STAYPUT locking geometry keeps the pressure door fully locked even in event of drive failure. The pushbutton controls manage the functionality of thermal and pressure locks to prevent opening at load temperature above 80°C and pressures above 0.2 bar. • Tactrol 2® microprocessor control with simple and fully variable setting of process time, temperature with graphic indication of cycle status. • Automatic timed free-steaming. • Water cooling jackets.1 • Pre-cycle vacuum in which multiple Vacuum stages are programmed with interspersed heating to achieve steam penetration. Incorporates Vacuum Assisted Cooling1 • Pulsed freesteaming to maximise efficiency of Pre-cycle vacuum phase.1 • Post Cycle Drying.1 • Epoxy coated panels and frame members are treated with an anti-bacterial agent which is effective against all bacteria and fungi including MRSA. • Pressure vessel carries a 10 year warranty and is insurance approved. • Service and support direct from manufacturer (or appointed distributor). 1 Optional Priorclave Limited 129-131 Nathan Way, West Thamesmead Business Park London, SE28 0AB T: +44 (0)20 8316 6620 F: +44 (0)20 8855 0616 For Direct Steam Heated models substitute SH for EH. Internal Steam Generator versions available.

Installation Specification model: PS/RSV/EH230 Steam heated models have an extra 45mm working height. All Priorclaves comply and conform to relevant international standards including BS2464-1993, PC500:2012+A1 Cat.3 European PED 97/23/EC B1+D, EMC compliance tested and CE marked for BS EN 61010-2-41. Our highly trained service technicians provide dedicated pre- and after-sales support including planned maintenance programmes to ensure you get the most from your Priorclave. Our service doesn’t stop there though, as we offer calibration and performance qualification services to ensure that your...