Cutting Equipment Overview

This document provides specifications and descriptions for various cutting equipment components, focusing on guide bars and associated saw chains used in different machining systems.

1. Equipment Types and Descriptions

• Guide Bars: Multiple types are listed, including FSS0NDER82, FSS0NDER84, FSS0NDER88A, and FSS0NDER88D.
• Associated Saw Chains: Each guide bar type is paired with specific saw chains designed for optimal performance.

2. Guide Bar Lengths and Applications

• Joinery and Portal Machining Systems: Guide bars of 500 mm length are used in systems such as PBA and K2i, featuring fully hardened running surfaces.
• Portal Machining Systems: Similar 500 mm guide bars with full hard-faced running surfaces are specified.
• Joinery Machining Systems: Longer guide bars of 1250 mm and 625 mm lengths are used, fully hardened for durability.

3. Chain Pitch and Groove Width

• Chain pitch sizes include 3/8" and 1.6 mm, with groove widths varying accordingly.
• Kerf sizes are specified for different dies: 8 mm for HMH3/8" crosshead dies, 12 mm for Duracut and Procut dies, and 13 mm for Logmax.

4. Additional Features and Recommendations

• Lubrication points are included in several guide bar and chain combinations to ensure smooth operation.
• Optional hard-faced surfaces are available for enhanced wear resistance.

5. Summary of Key Parameters

Critical Notes: Proper matching of guide bar length, kerf size, and chain pitch is essential for optimal cutting performance. Inclusion of lubrication points and hard-faced surfaces enhances durability and operational efficiency.