Pumps and motors catalog
1 / 25Pages

PRINCE MANUFACTURING CORPORATION/WORLD HEADQUARTERS • P.O. BOX 7000 • NORTH SIOUX CITY, SOUTH DAKOTA 57049-7000 URL: www.princehyd.com • E-MAIL: prince@princehyd.com O.E.M. CUSTOMER SERVICE: (605) 235-1220 • FAX (712) 233-2181 DISTRIBUTOR CUSTOMER SERVICE: PHONE (605) 235-1220 • FAX (712) 233-2181

PRINCE PTO HYDRAULIC PUMPS Up to 40 gallons per minute and up to 2250 psi UNIQUE FEATURES: PLUS STANDARD FEATURES: • Self-adjusting wear plates on both sides of the gears. • Proper size hose adapters are provided for inlet ports. • Two outlet ports are provided with a NPT adapter for one port and a plug to seal unused port. • Center section available in high strength aluminum alloy for std. duty cycle or in high strength cast iron for high duty cycle use. • Tractor front end loaders • Pull-type cotton pickers • Cotton balers (module builders) • Reliable • Efficient • Roller Bearings • Run...

ALUMINUM CENTER HOUSING PTO PUMPS DIMENSIONAL DATA PUMP MODEL ACTUAL DISPLACEMENT INLET PORTS RECOMMENDED HOSE SIZES DRIVE SHAFT REQUIRED 1. Barbed adapter for 1 1/4” hose included. 270011013 2. Barbed adapter for 1 ” hose included. 3. Female pipe adaptor for 3/4” NPT included. 270011017 500204011 TYPICAL TORQUE ARM INSTALLATION A AUXILIARY OUTLET PORT INLET PORT OUTLET PORT OUTLET PORT AUXILIARY OUTLET PORT INLET PORT 2.63 R TYPICAL TORQUE ARM INSTALLATION 9.50 MIN DRIVE SHAFT D E CAST IRON CENTER HOUSING PTO PUMPS 3/8-16NC-2B DIMENSIONAL DATA PUMP MODEL ACTUAL DISPLACEMENT INLET PORTS 1....

ALUMINUM CENTER HOUSING REAR PORT PTO PUMP MAIN OUTLET PORT #12 SAE ORB PORT (1 1/16-12 UN-2B) AUXILLIARY OUTLET PORT #12 SAE ORB PORT (1 1/16-12 UN-2B) INLET PORT #16 SAE ORB PORT (1 5/16-12 UN-2B) TYPICAL TORQUE ARM INSTALLATION PRINCE MANUFACTURING CORPORATION/WORLD HEADQUARTERS • P.O. BOX 7000 • NORTH SIOUX CITY, SOUTH DAKOTA 57049-7000 URL: www.princehyd.com • E-MAIL: prince@princehyd.com O.E.M. CUSTOMER SERVICE: (605) 235-1220 • FAX (712) 233-2181 DISTRIBUTOR CUSTOMER SERVICE: PHONE (605) 235-1220 • FAX (712) 233-2181 SEE PAGE 25 OF THE STANDARD PRODUCT PRICE LIST FOR PRICING

CAST IRON CENTER HOUSING REAR PORT PTO PUMP 1.69 AUXILLIARY OUTLET PORT #12 SAE ORB PORT (1 1/16-12 UN-2B) INLET PORT #16 SAE ORB PORT (1 5/16-12 UN-2B) MAIN OUTLET PORT #12 SAE ORB PORT (1 1/16-12 UN-2B) TYPICAL TORQUE ARM INSTALLATION PRINCE MANUFACTURING CORPORATION/WORLD HEADQUARTERS • P.O. BOX 7000 • NORTH SIOUX CITY, SOUTH DAKOTA 57049-7000 URL: www.princehyd.com • E-MAIL: prince@princehyd.com O.E.M. CUSTOMER SERVICE: (605) 235-1220 • FAX (712) 233-2181 DISTRIBUTOR CUSTOMER SERVICE: PHONE (605) 235-1220 • FAX (712) 233-2181 SEE PAGE 25 OF THE STANDARD PRODUCT PRICE LIST FOR PRICING

REAR PORTED PTO PUMPS PERFORMANCE DATA 500 PSI PUMP MODEL NOTE: Performance values are average values. Individual pump performance may vary. Performance based on 140 SUS oil at 120° F. SPECIFICATIONS PUMP MODEL ACTUAL DISP. INLET PORT MAIN OUTLET PORT AUXILIARY OUTLET PORT INLET ADAPTER OUTLET ADAPTER SPECIAL NOTE: Recommended hose sizes for the HC-P-K11 and HC-P-K11C are 2” for the inlet line and 1” for the outlet line. Seal kit No. for the HC-P-K11 and HC-P-K11C is: PMCK-PTO-1A. HC-P-K11 and HC-P-K11C pumps available with 1 3/8 diameter 21 tooth spline drive only. HC-P-K26 same as...

PUMP ACCESSORIES PUMP TORQUE ARM KIT The 180900877 torque arm kit was designed to simplify Prince PTO pump installation by eliminating the need to fabricate a custom torque arm. Items included in the kit are: 1-Torque arm 2-3/8-16 mounting bolts 1-Eye bolt/chain assembly NOTE THAT TORQUE ARM KIT NO. 180900877 FITS ALL MODEL PTO PUMPS RESERVOIR BREATHER ADAPTER The 200400039 breather adapter enables a standard adapter enables a standard Prince 10 micron spin-on filter element* to be used as filter element* to be used as a reservoir breather. *Part Number FA10 FITTINGS AND ADAPTERS MODEL...

SP SERIES HYDRAULIC GEAR PUMP OUTSTANDING FEATURES • Patented Non-Symmetrical Gears The adoption of non-symmetrical gears insures greater power per unit volume compared with pumps of conventional design. The compact gear compartment has enabled high-pressure operation. The increased number of gear teeth has reduced the flow pulsation and minimized the noise. U.S.A. U.K. French German Patent No. Patent No. Patent No. Patent No. • Double pumps: Available in SP20, SP25 and SP25/SP20 Combinations. • Maximum speed from 3000 to 4000 RPM using SAE 10W oil. • Displacement covers .400 in3/rev. to...

SP20 SERIES SAE “A” FLANGE PUMP New Updated Design • More Port Options • More Shaft Options • Lower Price • Contact your sales representative for more information The SP20B pump now utilizes self-lubricating thrust blocks that eliminate the need for separate wear plates. They are made from a high strength aluminum alloy with exceptional anti-galling properties. This new thrust block design also incorporates advanced bearings designed specifically for high pressure hydraulic pumps. This new bearing features a robust fluoropolymer PTFE wear surface that yields unsurpassed load carrying...

INLET/OUTLET PORT (REAR PORTED MODELS) SP20 SERIES DIMENSIONAL DATA INLET/OUTLET PORT 4.25 OUT (REAR PORTED MODELS) 1.88 INLET/OUTLET PORT (SIDE PORTED MODELS) .64 KEYED SHAFT KEYED SHAFT SHAFT CODE 2 INPUT HORSE POWER INPUT HORSE POWER INPUT HORSE POWER INPUT HORSE POWER INPUT HORSE POWER INPUT HORSE POWER INPUT HORSE POWER FLAT ROOT SIDE FIT INPUT HORSE POWER FLAT ROOT SIDE FIT INPUT HORSE POWER FLAT ROOT SIDE FIT INPUT HORSE POWER SHAFT CODE 3 11 TOOTH 16/32 DP 30O PA FLOW (GPM) INPUT HORSE POWER SHAFT CODE 5 10 TOOTH 16/32 DP 30O PA .826 TYPICAL PERFORMANCE DATA .834 SHAFT CODE 9 9...

SP25 SERIES SAE “B” FLANGE PUMP MODEL CODE SP25A 38 A 9 H 1-R X SERIES NO SHAFT SEAL TYPE DISPLACEMENT CODE (CC/REV) OMIT FOR STANDARD BUNA-N H-MEDIUM PRESSURE BUNA-N PORT LOCATION ROTATION (FACING END OF SHAFT) A-SIDE INLET AND OUTLET D-REAR INLET AND OUTLET C-BOTH SIDE AND REAR INLET AND OUTLET, STEEL PLUGS E-BOTH SIDE AND REAR INLET AND OUTLET, PLASTIC PLUGS L-COUNTER CLOCKWISE R-CLOCKWISE DRIVE SHAFT 1-SAE 13 TOOTH 16/32 SPLINE 2-SAE 7/8” STRAIGHT KEYED PORT TYPE MOUNTING H-SAE “B” 2 BOLT SPECIFICATIONS INLET PORT MODEL DISP. RATED NUMBER IN3/REV PRESSURE (PSI) OUTLET PORT FULL THREAD...