PRIMIX company and product brochure
16Pages

Mixing and conditioning of liquids and gases

STATIC MIXERS & HEAT EXCHANGERS PRIMIX has been going for over 30 years and has built up a reputation as an international supplier of top quality static mixers and heat exchangers. Most of the mixers are developed specifically based on the customer’s process application. This is done with great care and attention by an experienced and highly-trained workforce. PRIMIX PERFORMANCE BY DESIGN At PRIMIX we believe that maximum performance in the process can only be achieved with the right design. In the design we combine our extensive knowledge in the field of fluid dynamics with a very precise...

THE RIGHT SOLUTION FOR EVERY APPLICATION Whether you are looking for a static mixer for a largescale chemical process, to cool down food products or to mix additives in water treatment, PRIMIX offers the right solution for every application. PRIMIX static mixers and heat exchangers will allow you to accurately mix, process and condition liquids, gasses and dispersions. PRIMIX mixers and heat exchangers are fully geared to the desired process flow volumes with flow rate diameters varying from 2 metres to 4 mm. Depending on the process; the finish may be electro-polished, extra durable and/or...

STATIC MIXERS A PRIMIX static mixer lets you create a homogeneously distributed mixture between liquids and/or gasses in a continuous process. This is done without any moving part, with the result that no extra electrical supply or mechanical elements are required. This makes the PRIMIX static mixers very low-maintenance components and extremely safe from a process-technical point of view. A PRIMIX static mixer is easy to clean in a CIP cycle and depending on the process requirements, the system may have a fully sanitary/sterile/aseptic finish. In the case of static mixers with removable...

LAMINAR FLOW In a static mixer based on the laminar principle, the flow is repeatedly split into sub-flows, which are then merged again. The correct pitch creates a balanced flow from outside to inside and vice versa. The medium to be mixed is thus mixed in a large number of thin layers and the number of layers created is what determines the degree of mixing. TURBULENT FLOW With a static mixer based on the turbulent mixing principle, the mixing effect is mainly achieved by internal rotation and the shearing of the layers of fluid at the point where the direction of rotation is reversed....

OVERVIEW MIXERS With the PMS, PMQ, PMX and PMV mixers, the performance is geared 100% to the process Standard helical or spiral shaped elements Up to ±160 mm diameter Suitable for basic mixing applications, liquid and gas Used for heat transfer enhancement Available in wide range of materials X-crossed type element Wide range of sizes Relative high pressure drops and almost dead spot free Very suitable for high viscosity mixing Quatro shaped elements Performance equal to PMS From ±160 mm diameter to infinity Suitable for basic mixing applications: liquid and gas From ±50 mm diameter to...

QUICK DELIVERY PRIMIX can supply over 10,000 variants of quality mixers from stock. These mixers from the QDS range are put together in no time from loose stock components and the same engineering expertise is applied as in the PRIMIX custom-made mixers. Static mixers available from stock QDS mixers are if necessary be delivered within 48 hours. Just like the custom-made mixers, all QDS mixers are fully geared to the process and designed to the process parameters indicated. • AISI 316L and PVC • Up to ±160 mm diameter • Suitable for all basic mixing applications of liquid and gas QDS Quick...

HEAT EXCHANGERS The PRIMIX spiral-shaped mixer element is the basis of the PRIMIX heat exchangers that can be used to heat and cool viscous products. With its advanced design, the PRIMIX heat exchanger holds a unique position between conventional shell and tube heat exchangers. All PRIMIX heat exchangers are designed and produced to customer specifications. The heat exchangers are available for the treatment of all sorts of viscous liquids. Quicker refreshment, better heat transfer Improved heat transfer. Lower pressure drop and shorter residence times The design of the spiral-shaped...

Advantages: • Special distribution head and mixer element connection result in true plug flow preventing product degradation • Improved heater transfer rate - resulting in 30 - 40% lower weight • Low pressure drop at product and service fluid side • Lower volumes and shorter residence times With ACT 20% - 100% more transfer of heat The advanced connection technology (ACT) applied between process tube and mixer elements results in additional surface with exchange rates that are equal to the base material of process tube and mixer element. As a result of this property, the surface of each...

NON DESTRUCTIVE EXAMINATION DESCRIPTION YES/NO VALUE Hydrostatic test Yes 90 [bar (g)] Radiographic test (RT) Yes 100 [%] Dye penetrant test (PT) Yes 100 [%] Magnetic particle test (MT) Retain method elements Removable 3.1, 3.1+ and 3.2 cert. only Material marked Packing Wooden box FLOW DIRECTIO AS BUILT N1 Inlet N2 outlet N3 N4 Injector WN RTJ ASME B16.5 WN RTJ ASME B16.5 WN RTJ ASME B16.5 WN RTJ ASME B16.5 PRIMIX also designs and delivers under different design codes, including: EN-13445, PED, ASME and U-Stamp. PRIMIX is of course ISO-9001 certified. PRIMIX applies rigorous standards when...

Pickled & passivated Volume mixer Yes 1X zincetylsilicate 75 µm Mass (empty) Yes 1X Siliconealuminium 25 µm Mass (working condition) Yes 1X Siliconealuminium 25 µm Aluminium Grey DESIGN PROPERTIES VALUE DESCRIPTION ASME VIII Div.1 Design pressure (min./max.) N/A Minimum design metal temp.(MDMT) 0 [mm] Design temperature (min./max.) Insulation thickness Painting system Primer 2e Coat 3e Coat Final colour DESCRIPTION Design code Applicable piping class Corrosion allowance Pd > 0.5 bar @ Tdesign above normal atmospherical pressure PED Fluidgroup PED Category PED Module ATEX DESCRIPTION For...