video corpo

EBe
12Pages

{{requestButtons}}

Catalog excerpts

EBe - 1

PUNCHING LASER CUTTING BENDING INTEGRATED PUNCHING & SHEARING INTEGRATED PUNCHING & LASER CUTTING FLEXIBLE MANUFACTURING SYSTEMS ® ® SERVO ELECTRIC BENDING AUTOMATION

Open the catalog to page 1
EBe - 2

SERVO ELECTRIC AUTOMATION Applications vary, and so do optimum choices in manufacturing technology. As a full range supplier, FINN-POWER provides several different solutions for productive bending of sheet metal components: SERVO ELECTRIC PRESS BRAKES HYDRAULIC PRESS BRAKES SERVO ELECTRIC BENDING CENTERS The first generation of automatic, hydraulic FINN- POWER bending centers was introduced two decades ago. Since then, continuous, innovative development has elaborated the technology, add- ing further versatility and improving accuracy and A revolutionary step was taken in 2004 on the...

Open the catalog to page 2
EBe - 3

Fully automatic in loading as well as in unloading operation, the Express Bender has a loading device with automatically adjustable gripper and a loading table with double sheet detector. A standard unloading table with free rolls allows the operator to remove the ready finished components while remaining in safety area. Medium to long series manufacturing Large components Fully automatic process in loading as well as in unloading PROCESS BENDING CENTER (BCe) The operation of FINN-POWER BCe is semiauto- matic. It is a productive solution for small batches as well as for serial...

Open the catalog to page 3
EBe - 4

EXPRESS BENDER: SOPHISTICATED FEATURES Operating Principle Express Bender uses modern NC-controlled elec- trical servo drive technology, which is the best solu- tion for precise interpolation of several axes. CNC control exchanges information and synchroni- zation with PLC through digital communication. All main machine functions and all axes involved in the bending process are numerically controlled. The Express Bender works the edges of the panel. Generally, the process starts at the external edge of the sheet and continues to the inner part of the sheet, working one side after another in...

Open the catalog to page 4
EBe - 5

NEW BENDING PRINCIPLE WITH INTERPOLATION OF BLADE MOVEMENTS Optimum surface quality is a decisive factor in many bending applications. The FINN-POWER solu- tion offers a choice of two interpolation modes of operating blades. When the "rolling mode" is used, there is no rela- tive friction between blade and material, which saves the material surface from damages and reduces wear of the blade. Alternatively, when using the standard "circular mode", the contact point remains constant whereas the contacting point of the blade changes during the bending movement. The contact line of the blade to...

Open the catalog to page 5
EBe - 6

The construction has two frames: the stationary main frame (1) and the C frame (2). The main frame is a robust, welded structure that provides the necessary rigidity for withstanding the forces generated during the bending phases. The C-frame mounts within the main frame and supports the upper and lower bending blades. Upper Tool The upper tool (3) consists of a bar and segments that can be composed to match the size required by the work piece and to contract for part exit. It is assembled to a welded structure with arms hinged to the rear part of the main frame. Upper tool movement is...

Open the catalog to page 6
EBe - 7

Programmable upper tool crowning device The movements of this device are actuated by pro- portionally controlled hydraulic cylinders. The mech- anism can flex the upper tool structure and, conse- quently, the tools. It is used for correcting the straightness when bending thick material or long Work piece positioning pins The two positioning pin units support two pins each (main and secondary) and they are used at the beginning of the cycle to square the new part cor- rectly. They are mounted on the lower tool bar sup- port frame and are individually controlled by 3 CNC axes. The left unit...

Open the catalog to page 7
EBe - 8

Hydraulic Unit unit (less than 90 grated (but easily accessible] in the manipulator table area. Unloading Conveyor and Unloading Table The belt conveyor in the working table unloads the finished piece from the working table onto a free roll table of the unloading station. The belt conveyor feeds the part onto an inclined table with free rolls, from which the operator removes it. Safety devices Depending on the model chosen each machine is equipped with safety equipment fulfilling CE require- ments. This ergonomical protection separates the operative area of the machine, and prevents any-...

Open the catalog to page 8
EBe - 9

BendExpress BendExpress is a Windows® based application, which runs on PC. It is a graphical machine user interface on a Windows® XP Personal Computer. FINN-POWER TELESERVICE Teleservice The machine is equipped with Teleservice as standard. If the customer provides a direct telephone line or internet connection to bending machine by one modem router installed in the electrical cabinet, FINN-POWER can support the operator in problem cases. Further, the software can be updated via Teleservice EXPRESS BENDER BY FINN-POWER: THE OPTIMUM COMBINATION Force – applied gently Precision plus speed...

Open the catalog to page 9
EBe - 10

The optimum bending result in every application 10

Open the catalog to page 10
EBe - 11

FINN-POWER Oy and its worldwide network of subsidiaries and representatives specialize in advanced sheet metal working technology. Following the introduction of its first hydraulic turret punch press in 1983 FINN-POWER has developed a modular product range for punching, laser cutting and bending, for solutions integrating right angle shearing and laser cutting with punching, and for automation of the entire material flow of your sheet metal working process.

Open the catalog to page 11
EBe - 12

Flexibly yours® FINN-POWER GROUP Global Headquarters & Manufacturing Sales & Service Units 1Ü4Ü Martlngrove Road, Unit 11 Toronto, Ontario Representative Office Golden Dragon Ind. Centre Hong Kong, P.R. CHINA Gulf Area Representative Office Hamrlya Free Zone-Shj United Arab Emirates Finn-Power GmbH Headquarters & Production Finn Power Italia srl Sales S. After Sales Finn Power Italia srl Ctra. Mollns de Rel-Rubi, FINN-POWER, Flexibly yours, Combi FMS, Bendcam, Bendterm, Ecobend, Energy n Efficient Use, Ecocut, Ecopunch, Express, ISC, Multi-Tool, NC Express, Night Train FMS, Shear Genius and...

Open the catalog to page 12

All PRIMA POWER catalogs and technical brochures

  1. Punch Genius

    8 Pages

  2. The Combi

    24 Pages

  3. Texas-style

    4 Pages

  4. Tulus® Cell

    4 Pages

  5. P series

    24 Pages

  6. eP-1030

    8 Pages

  7. eP1

    2 Pages

  8. LPe6x

    8 Pages

  9. LPef Series

    8 Pages

  10. Platino Fiber

    12 Pages

  11. Laser Genius

    2 Pages

  12. Platino

    6 Pages

  13. ZAPHIRO

    6 Pages

  14. MAXIMO

    2 Pages

  15. DOMINO

    2 Pages

  16. Laser Next

    8 Pages

  17. RAPIDO

    12 Pages

  18. OPTIMO

    6 Pages

  19. E5x

    4 Pages

  20. SYNCRONO

    7 Pages

  21. LPe6f

    4 Pages

  22. BCe

    2 Pages

  23. EB

    2 Pages

  24. eP Brake

    8 Pages

  25. C5 Punch Press

    16 Pages

  26. E-series

    20 Pages

Archived catalogs