Exhibit with us
*mydirectindustry  
English
  1. Catalogs
  2. Presco AG
  3. BR – I

BR – I

BR – I
1 / 2 PagesView full catalog

BR – I

Product catalog summary
Overview: The BR-I100 is an electronically compensated current burden device designed for four-terminal voltage burdens up to 200 VA. It adheres to IEC, VDE, IEEE, and ANSI standards and offers remote control via an RS232 interface. The device is lightweight and manufactured by Presco AG in Switzerland.
Technical Specifications:
  • Standards Compliance: IEC 60044-1, VDE 0414, ANSI/IEEE C57.13-1993.
  • Nominal Currents: 1 A and 5 A.
  • Nominal Powers: Ranges from 5 VA to 200 VA with specific power factor ratings.
  • Frequency: 50 Hz for IEC/VDE and 60 Hz for ANSI/IEEE standards.
  • Overload Capacity: Maximum 2 times the nominal current (IN).
  • Uncertainty: Rated power and phase angle uncertainties are ±3% and ±3 crad, respectively.
Environmental Conditions:
  • Reference Conditions: Temperature at 23°C ± 2°C, humidity between 45% and 75%, and air pressure at 101.3 kPa.
  • Operating Range: Temperature from 5°C to 40°C, non-condensing humidity from 10% to 90%, and air pressure from 70 kPa to 106 kPa.
Physical Characteristics:
  • Dimensions: 500 mm x 470 mm x 192 mm.
  • Weight: Approximately 55 kg.
  • Power Supply: 230V, 50 Hz, 300 VA.
Manufacturer Information: Presco AG, Zürcherstrasse 70, CH-8104 Weiningen, Switzerland. Contact via phone at +41 44 750 63 63 or email at [email protected]. More information available at www.prescoag.com.
Note: Specifications are subject to change without notice.
See more

Catalog excerpts

BR – I-1

Electronically Compensated Current Burden BR-I100 four - terminal voltage burden up to 200 VA according IEC - VDE -IEEE - ANSI standards Remote control via RS232 - interface Low weight E-mail: [email protected] Internet:www.prescoag.com

 Open the catalog to page 1
BR – I-2

Current Burden acc. to IEC/VDE/ANSI/IEEE, electronically compensated. Type BR-I100 Functions according to IEC 60044-1 / VDE 0414 Nominal Currents (IN):) Nominal Powers Burden ratings Power factor Frequency Overload Uncertainty of Rated Power Uncertainty of Phase Angle Functions according to ANSI/IEEE C57.13-1993 Nominal Currents (IN): Nominal Powers Frequency Overload Uncertainty of Rated Power Uncertainty of Phase Angle Reference Conditions Temperature Humidity Air Pressure Rated range of use according to Standard IEC 359 Temperature Humidity, not condensing Air Pressure Dimensions Weight: Power...

 Open the catalog to page 2

All Presco AG catalogs and technical brochures

  1. TG – 1
    TG – 1

    2  Pages

  2. TG – 3
    TG – 3

    2  Pages

  3. TG – 4
    TG – 4

    2  Pages

  4. FT – 12
    FT – 12

    2  Pages

  5. PD – CLSB
    PD – CLSB

    6  Pages

  6. Series – W
    Series – W

    2  Pages

  7. ED – 00CR
    ED – 00CR

    2  Pages

  8. BR – U
    BR – U

    2  Pages

  9. CK – Series
    CK – Series

    1  Page

  10. CL – Series
    CL – Series

    2  Pages

  11. CG – Series
    CG – Series

    1  Page

  12. ID – 0500
    ID – 0500

    8  Pages

  13. PVM – 100
    PVM – 100

    6  Pages

  14. ED-00CR - Low Voltage Unit for Capacitive Standard Divider
    ED-00CR - Low Voltage Unit for Capacitive Standard Divider

    2  Pages

  15. C Series - Standard Air Capacitors
    C Series - Standard Air Capacitors

    2  Pages

  16. W Series - Automatic Current and Potential Transformer Test
    W Series - Automatic Current and Potential Transformer Test

    2  Pages

  17. PD-4 Professional Partial Discharge Measuring System
    PD-4 Professional Partial Discharge Measuring System

    2  Pages

  18. TG-1MOD - Capacitance and Dissipation Factor Measuring Bridge
    TG-1MOD - Capacitance and Dissipation Factor Measuring Bridge

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.