Features ThisTP0702U Series of Surface Mountable ferrite wound inductor is a stronger solution in very small dimensions performing very good electrical properties, a very good solution for RTPMS, Keyless Go and Keyless entry systems: Characteristics - Size: 8x2.2x2.5mm. -Verygood mechanical performance. - High sensitivity in the smallest volume. - Very stable electrical properties in full operational temperature range (-40, +125°C). - Good performance in thermal shock. - Big metallised pad area Pb free. - Good cost/performance ratio. -Terminals: Ag-Ni-SnIOO. - Wire: H, 125°C, Solderable. - Max. Operating Temperature 125°C. Single Axis Transponder Inductors Applications - Due to its small dimensions, it’s a suitable design for other applications working at lower frequencies. Sensitivity Dimensions (mVpp/ (mm) The specification chart is a reference guide for the most common required values at working frequencies of 125 kHz. Any other inductance value at LF or tighter tolerances can be provided.