Emitter Antenna housing plastic base-potted and outside connector unsealed & sealed._ The antenna KGEA-BFCWX is designed for emission of a LF field to allow hands free access towards the Customer Device Identification for automotive application. This type antenna is inserted in the vehicle being integrated into the Access and Start Hand Free subsystem for requirements Passive Entry and Remote keyless Go System. Housing plastic base (materials PBT, PA-66 or ABS) assuring extreme conditions of humidity, liquids, substance and extreme environments. The antenna concept is similar to KGEA-BFCR series, but smaller in size. The connector (sealed and unsealed) is optional and it can be customized to required features. Designed to allow long emitting-reading distances in the smallest volume. - Ideally used in keyless smart entry system - Low tolerances in the resonance frequency LC - High stability in temperature (-40°C up to +85°C). - Connector located outside assembly housing plastic base (Optional). - Long reading distances and average current 2-4App. -Stronganchor points which providean easy assembly and will ensure mechanical robustness. - Custom LCR value under demand. Electrical diagram Mechanical dimensions L: Ferrite core coil inductance R: Copper resistance and connection C: Tunning internal capacitor NPO Rdc: Optional parallel resistor Nomenclature description Working freq.: Electrical specifications The specification chart is a reference gui- de for the most common required values ce value at LF or tighter tolerances can be provided. Please contact our sales de-