ODS-750
8Pages

GENERAL FEATURES: Sine wave output voltage Selectable output frequency: 50/60Hz High input-output isolation 3000Vrms Remote inhibit Input and output alarm Railway version EN50155, RIA12 (optional) Fire and smoke: EN45545-2 approved : Startup voltage ≤ 10.2V. Undervoltage shutdown < 9.5V Specifications are subject to change without notice. These products are not intended for use as critical components in life support or nucle

INPUT Input voltage range Maximum input ripple OUTPUT Output voltage Output voltage adjustment range Load regulation Line regulation Output frequency Output wave distortion THD Output voltage HF ripple ENVIRONMENTAL Storage temperature Operating temperature full load Operating temperature 50% load Variable speed internal fan SAFETY Safety according to Dielectric strength: Input /output Dielectric strength: Output / Earth Dielectric strength: Input / Earth MECHANICAL Weight PROTECTIONS Against input over-currents Internal fuse for 36, 48, 72, and 110V input models Against output overloads <...

ORDERING CODES Input voltage range [V] Output current Appar. output power [VA] Output peak curr. 10ms [A] Active output power [W] No load input current [A] T Railway version according to EN50155 U Railway version according to EN50155 and RIA12* *RIA12 version only available for ODS-750-7273U and 7277U (rest available upon request) Model number Accessories must be ordered in a separated order line

BLOCKS DIAGRAM DESCRIPTION The ODS-750 consists of sine-wave 120Vac or 230Vac output voltage DC-AC converters. The frequency can be set to 50Hz or 60 Hz, and input and output are galvanically isolated. The ODS-750 inverters consist of two cascaded converters,one DC-DC generating an intermediate output voltage from the input voltage. That intermediate voltage is inverted to supply the output voltage and frequency by means of a second DC/AC converter. The input is protected against reverse polarity by means of fuse and against under-voltage by unit shutdown. The output has protection of...

(*) M3 threaded hole. Maximum screw depth: 3mm ACCESSORIES ACCESSORIES Screws included. Order 2 units per inverter Mounting base Screws included Mechanical Interface for subrackof 6U 11Te Screws included

EU DECLARATION OF CONFORMITY The undersigned, representing the following: Manufacturer: Address: PREMIUM, S. A., C/. Dolors Aleu 19-21, 08908 L’Hospitalet de Llobregat, SPAIN herewith declares that the product: Type: Models: is in conformity with the provisions of the following EU directive(s): 2014/35/EU Electromagnetic compatibility Restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS) and that standards and/or technical specifications referenced overleaf have been applied: EN 60950: 2005 Safety (Information technology equipment) Safety....

Applicable values for the different sections of the norm EN50155: 2017 4.3.1 4.3.2 Working altitude Ambient temperature Switch-on extended operating temp. Rapid temperature variations Shocks and vibrations load load load load < 100% < 100% (Without connectors handling) <50% <50% (Without Connectors handling) ST1 H1 According EN61373:2010 Category 1 class B Test Radiated emissions Conducted emissions Electrostatic discharge Radiated high-frequency Fast transients Magnetic field Pulse magnetic field Input Output Signal PE Input L to L Input L to PE Input Output Signal PE X/Y/Z Axis Limits...

Applicable values for the different sections of the norm RIA12 Type of disturbance 5.2 Supply related surge Direct transient Indirect coupled transient Voltage level Source impedance