MT Magnetic Linear Encoder Datasheet
3Pages

MODIFICATION CMT Magnetic linear encoder MT has measuring length of up to 50.000 Other parameters differ depending on required modifications, mm and accuracy up to ±25 pm. VERSION 1 [POWER SUPPLY +5V) Gap "d" between protective cover and reading head: - for CMTM - d = 0.3...0.7 mm; D - distance between external zero signal actuator and reading head Warning: To get the best accuracy distance d must be the lowest possible (in the indicated range). MODIFICATION PCMT MPxOO d - distance between reading head and magnetic band MP or protective cover CV (protective support SP) To get the best accuracy distance d must be the lowest possible (in the indicated range) Gap "d" between protective cover and reading head: - for CMTM - d = 0.3...0.7 mm; D - distance between external zero signal actuator and reading head DIGITAL READOUT DEVICES Warning: To get the best accuracy distance d must be the lowest possible (in the indicated range). connector connector RS10 ONC 10-pin round 10-pin round connector connector

READING HEAD VERSION M (MTM, CMTM, PCMTM) TTL output signals (F) Sine wave output signals (AV) - version 2 only TTL output signals (F) Sine wave output signals (AV) - version 2 only Measuring length (ML) Repeatability Max. measuring frequency Power supply - version 1 - version 2 Current consumption without load Current consumption with load Phase shift between signals Protection (IEC 529) Operating temperature - version 1 - version 2 Storage temperature Permissible humidity Permissible vibration (55...2000 Hz) Permissible shock (11 ms) Output signal shape Output signals Output scheme Weight...

PROTECTIVE BAND CV Stainless steel cover CV (width 10 mm, thickness 0,3 mm) for magnetic band MP protection is glued on magnetic band (excluding MP100) OUTPUT SIGNALS TTL output signals AV output signals - version 2 only A and B amplitude 0,6 V... 1,2 V (~ IV) R amplitude 0,25...0,6V (useful part) A and B phase shift 90° ±10° el. Reference voltage U0 2,5 V Amplitudes of signals are referred to measurement made with 120 Q impedance and power supply voltage of reading head 5V±5%. PROTECTIVE SUPPORT SP Aluminium protective support SP for magnetic band MP protection. Fixed on machine surface...