The CHRocodile MPS optical multi-point sensor offers up to 24 simultaneous distance and thickness measurements. Thanks to its 24 independent channels, CHRocodile MPS is used to use different probes (single point or multipoint) within the limits of 24 measured points. The MPS10 is a multipoint line probe dedicated to CHRocodile MPS controller. This new optical probe can make up to 10 measurements at once along a line. Compared to single probes, a larger surface area can be scanned faster using the CHRocodile MPS. CHRocodile MPS is a powerful sensor for glass industry applications. The CHRocodile MPS measures at a rate up to 108 000 points per second. This results in the shortest measuring times. ■ Measurement of layer thickness and distance along a line ■ Replaces up to 24 individual sensors ■ Any combination of point and line measuring heads ■ 5 encoder inputs, trigger input, sync-output ■ Wall thickness measurements of colored glass ■ 19" wide housing/rack mountable ZISE SCHNELL BERl PRECITEC OPTRONIK THE SMART WAY TO MEASURE

TECHNICAL SPECIFICATIONS OF CHROCODILE MPS application distance, thickness measurements / second number of measuring channels 24 synchronization with external devices trigger input, synchronizing output, 5 encoder inputs Ethernet, service ports: RS-422, USB transfer rate 921600 Baud (USB: virtual comport) light source fiber connection 5.5 kg The measurement rate depends on the number of utilized channels. Changes and/or innovations may lead to differences in the listed technical data. 1) TECHNICAL SPECIFICATIONS OF OPTICAL PROBE MPS 10 application thickness, distance measuring range number of...