CHROCODILE MPS 2L Quality control via optical inspection ELL BERI> ’’AZISE SCI Precitec has developed a new generation of sensors, the CHRocodile MPS 2L flexible Multi-Point Sensor, offering up to 24 simultaneous and independent non-contact measurements in distance and thickness mode. Together with the newly developed line probes one can measure two lines of 12 points each. The measuring points are distributed on a line with a length of up to 12.5 mm. Since the channels can be addressed independently, other configurations, such as using one line probe and up to 12 additional point probes can be used. This enables the possibility to use a line probe with a pitch of 1mm for critical zones of the container, while for the less critical zones a larger pitch of 2 mm or 4mm might be favored. With this great flexibility, together with the small footprint the CHRocodile MPS 2L is particularly suitable for inline inspections of container glass at the hot and cold end. ► Measurement of layer thickness and distance along a line ► Replaces up to 24 individual sensors ► Cost efficient solution for multi-point inspections ► Small footprint ► Any combination of point and line measuring probes ► 5 encoder inputs, trigger input, sync-output ► Highly efficient optical probes ► Applicable for wall thickness measurement of colored and dark glasses USER-FRIENDLY & SAFE ► 42 HP wide housing/rack mountable ► Non-contact measurements ► Robust and maintenance-free

TECHNICAL SPECIFICATIONS OF CHROCODILE MPS 2L application distance, thickness measurements / second 4500 (2 optical line probes); 9000 (1 optical line probe) 11 number of measuring channels 2 x 12 points per line synchronization with external devices trigger input, synchronizing output, 5 encoder inputs interface Ethernet, service ports: RS-422, USB transfer rate 100 Mbit (Ethernet), 9600 - 921600 Baud (RS422), USB: 921600 Baud (virtual comport) light source LED TECHNICAL SPECIFICATIONS OF AVAILABLE PROBES multi point probe MP 18 multi point probe MP 10.5 single point probe...