MODEL 36 PRECISION OPEN FACE / PNEUMATIC LIFT FLAT LAPPING MACHINE PLATE-DIAMETER 36″ (914.4 MM) VERSIONS: 3 OR 4 RINGS TYPE: SINGLE SIDED Open face version (left), pneumatic lift version MEETING TODAY’S PRECISION SURFACING REQUIREMENTS Available in an open face or a pneumatic lift version, each optionally with 3 or 4 rings Can be used to process a wide variety of materials including semiconductors, electro-optics, ceramics, metals and other specialty products Heavy duty, tubular steel frame with integrally mounted drive motor and gear reducer Heavy duty work table, vertically adjustable Conditioning rings with adjustable roller bearing yoke assemblies to maintain lap plate flatness ACHIEVING HIGH STANDARDS OF FLATNESS AND SURFACE FINISH enhancing surface qu

HIGHLIGHTS MODEL 36 (OPEN FACE / PNEUMATIC LIFT) Individual two hand anti-tie down pneumatic cylinder controls. Variable down pressure from 66 lbs / 30 kg to 440 lbs / 200 kg when connected to 60 psi minimum air supply Abrasive slurry distribution system complete with pump, agitator, storage tank, waste container and multiple point feed tubes Electrical system wired for 230 /  460 V. 60 Hz, 3 phase with operator controls at 110 V. NEMA Type 12 enclosure complies to JIC standards High torque drive unit consisting of 5.3 hp / 4 kW motor and heavy duty gear reducer. Electronic soft start included...